We have collected the most relevant information on Standard Audio Rack Depth. Open the URLs, which are collected below, and you will find all the info you are interested in.
Define: Rack Mounting Depth
https://www.server-racks.com/rack-mount-depth.html#:~:text=Here%20are%20the%20OEM%20standards%3A%20The%20depth%20was,although%205%E2%80%B3%20and%206.5%E2%80%B3%20are%20also%20readily%20available.
How Deep Should an Audio Cabinet Be? - WOODWEB
https://www.woodweb.com/knowledge_base/How_Deep_Should_an_Audio_Cabinet_Be.html
From contributor L: Most consumer grade stereo equipment is about 14" deep x 17" wide. This is measured from the knobs up front to the wire jacks on the back. Commercial grade equipment is 19" wide to fit in rackmounts. To this you need to add at least 4" of depth for the wiring in back.
Define: Rack Mounting Depth - server-racks.com
https://www.server-racks.com/rack-mount-depth.html
The depth was commonly 19″ to 24″. This depth is still used for Audio Racks. The most common depth is now approximately 29″ since this is close to all OEM’s. Measuring 4Post Rack Mount Depth. Measuring 2Post Rack Mount Depth (Upright Depth) 2Post relay rack’s mounting depth is also called the Upright Depth. This most common upright depth is 3″, …
Server Rack Sizes: Understanding the Differences ...
https://www.racksolutions.com/news/blog/server-rack-sizes/
Data center floor panels are typically 24 in. x 24 in. Thus, a standard rack with a depth of 48 inches and a width of 24 inches makes it much easier to match up your racks with your available floor space. A rack with a 24-inch depth keeps things rather simple as well because it takes up exactly one panel.
Racks & Rack Cases Buying Guide - Sweetwater
https://www.sweetwater.com/insync/racks-rack-cases-buying-guide/
The width and height of rackmountable equipment is standardized in the audio industry. At the core of this standard is the rack space, or unit. One rack space is defined as 1.75″ from top to bottom and 19″ in width. Rack Space — Top to Bottom Rack equipment that is 1.75″ high or some multiple of that conforms to the standard.
Data Center Rack Standards - Data Center Solutions
https://teamsilverback.com/knowledge-base/data-center-rack-standards/
Various spacings between the front and back strips are used; 31.5 inches (800 mm) is typical, and equipment is often designed to handle a range of rack depths. Depth of 39.4 inches (1,000 mm) is becoming increasingly common; more depth allows for more space to route cables at the back.
19-inch rack - Wikipedia
https://en.wikipedia.org/wiki/19-inch_rack
Standard-Depth Server Rack Enclosure, 48U | Tripp Lite
https://www.tripplite.com/48u-smartrack-standard-depth-rack-enclosure-cabinet-doors-side-panels~SR48UB/
Factory Preset Rack Depth (in.) 27.75: Maximum Device Depth (in.) 37: Minimum Device Depth (in.) 4: Rack Height: 48U: Shipping Dimensions (hwd / in.) 95.00 x 26.00 x 45.00: Shipping Weight (lbs.) 357.00: Unit Dimensions (hwd / in.) 89 x 23.63 x 43: Unit Weight (lbs.) 309: Weight Capacity - Rolling (lbs.) 2250: Weight Capacity - Stationary (lbs.) 3000: Rack Depth: Standard
AUDIO VISUAL SYSTEMS GENERAL STANDARDS & …
https://its.unl.edu/pdfs/UNL%20ITS%20AV%20Design%20Standards%20Rev2%20Mar17.pdf
Audio visual equipment is typically mounted in standard 19-inch racks. Racks must be provided with a minimum clearance to the front, rear and one side of 36 inches unless wall mounted.
The different dimensions of a 19 inch rack
https://www.serverrack24.com/blog/what-are-the-dimensions-of-a-19-inch-rack.html
The depth of a server rack. A server rack is available in a depth of 600mm, 800mm, 1000mm or 1200mm. Depending on the deepest device that will be placed, including power supply, the depth of a rack is chosen. A wall mount rack is available in a depth of 450mm, 600mm (tiltable) or a complete installation depth of 600mm. Height in Units (U)
Now you know Standard Audio Rack Depth
Now that you know Standard Audio Rack Depth, we suggest that you familiarize yourself with information on similar questions.
