We have collected the most relevant information on Pulseaudio Iec958 Dts. Open the URLs, which are collected below, and you will find all the info you are interested in.
20.04 - PulseAudio not passing AC3/DTS, downmixing to ...
https://askubuntu.com/questions/1364432/pulseaudio-not-passing-ac3-dts-downmixing-to-stero
pavucontrol: (same settings show up in Pulseaudio Volume Control GUI) Configuration tab: the only options for digital output are "Digtial Stereo (IEC958) Output" and "Digtial Stereo (IEC958) Output+Analog Stereo Input". Several websites said this is correct as Pusleaudio "should" pass AC3/DTS directly to the external DAC via S/PDIF.
DTS or AC-3 realtime encoder over hdmi via pulseaudio
https://stackoverflow.com/questions/50504246/dts-or-ac-3-realtime-encoder-over-hdmi-via-pulseaudio
But I really would like pulseaudio work itself in AC-3 or DTS to have 5.1 sound through SPDIF. linux pulseaudio hdmi dolby-audio-api. Share. Follow ... (IEC958 (AC3) Digital Surround 5.1 with all software conversions) a52:CARD=HDMI,DEV=7 HDA Intel HDMI, HDMI 1 (IEC958 (AC3) Digital Surround 5.1 with all software conversions) a52:CARD=HDMI,DEV=8 ...
Getting DTS 5.1+ sound via S/PDIF or HDMI using PulseAudio ...
https://blogs.gentoo.org/mgorny/2021/07/25/getting-dts-5-1-sound-via-s-pdif-or-hdmi-using-pulseaudio/
Getting DTS 5.1+ sound via S/PDIF or HDMI using PulseAudio While PCs still usually provide a full set of analog jacks capable of outputting a 5.1 audio, other modern hardware (such as TVs) is usually limited to digital audio outputs (and …
DTS Pulseaudio (dcaenc) - Community Help Wiki
https://help.ubuntu.com/community/DTS%20Pulseaudio%20%28dcaenc%29
The following script does the steps outlined in the rest of the document. It has only been tested on Ubuntu 14.04. Warning though, do not run it twice since you'll end up inserting same stuff to asound.conf and PulseAudio default.conf twice. Download and run script. chmod +x ./DTSPulseaudioInstaller sudo ./DTSPulseaudioInstaller.
PulseAudio - Official Kodi Wiki
https://kodi.wiki/view/PulseAudio
In order to allow passthrough to work with PulseAudio then it MUST be set to use a 2.0 channel configuration, despite the 2.0 setting this will still allow 5.1 audio from AC3, DTS, and EAC3. Note: PulseAudio does not currently allow TrueHD or DTS-MA passthrough, this is a PulseAudio limitation and not a limitation of the Kodi implementation, in ...
Gentoo Forums :: View topic - [Solved]Pulseaudio Failed to ...
https://forums.gentoo.org/viewtopic-t-1012654-start-0.html
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-dts-surround-51 D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/DTS) (iec958-dts-surround-51) D: [pulseaudio] alsa-util.c: Trying dca:0 with SND_PCM_NO_AUTO_FORMAT ...
default.conf\profile-sets\mixer\alsa\modules\src ...
https://cgit.freedesktop.org/pulseaudio/pulseaudio/tree/src/modules/alsa/mixer/profile-sets/default.conf
# # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as # published by the Free Software Foundation; either version 2.1 of the # License, or (at your option) any later version. ... [Mapping iec958-dts-surround-51] device-strings = dca:%f channel-map = front-left ...
Now you know Pulseaudio Iec958 Dts
Now that you know Pulseaudio Iec958 Dts, we suggest that you familiarize yourself with information on similar questions.
