We have collected the most relevant information on One Way Audio Cisco Ip Communicator Vpn. Open the URLs, which are collected below, and you will find all the info you are interested in.
One-Way audio with IP Communicator over VPN - Cisco
https://community.cisco.com/t5/other-collaboration-subjects/one-way-audio-with-ip-communicator-over-vpn/td-p/686311
IP Communicator 2.0(2) with CCM 4.1(3)sr2 over VPN connection. If both sides over VPN connection are IP Communicators, then we experienced one-way audio on the internal side(where CCM located); if internal side is a fixed IP Phone, there is no one-way audio issue. I know this is a common problem, most likely it related to routing/traffic block issue.
Solved: one way audio when using cisco ip …
https://www.experts-exchange.com/questions/26192439/one-way-audio-when-using-cisco-ip-communicator-over-vpn.html
the problem i have is that when the cisco ip communicator registers with the cme/cue router via a remote access vpn i only have one way audio from the cisco 7940 phone to the CIPC but not the other way around, however if i plug the pc into the 3550 switch and register the CIPC with the cme/cue router from there i have two way audio.
One way audio - FG IPsec VPN <-> Cisco IP Comm (s ...
https://community.fortinet.com/t5/Fortinet-Forum/One-way-audio-FG-IPsec-VPN-lt-gt-Cisco-IP-Comm-softphone/m-p/9619?m=107369
One way audio - FG IPsec VPN <-> Cisco IP Comm (softphone) Hi everybody! I’d configured a IPSec VPN in a FG 90D that runs perfectly with forticlient to access Windows shares and local servers. When I start Cisco IP Communicator, it registers with call manager, receive dial tone (I can hear it too), make & receive calls, but after the call is completed, the …
Cisco IP Communicator Administration Guide (1.1 ...
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cipc/1_1/english/administration/guide/admin/CADcfg.html
If the PC on which Cisco IP Communicator is running uses an unsupported software VPN client, audio IP address auto-detection will not work. The resulting symptom is one-way audio. In this case, you need to complete the following tasks: • First, run the Cisco IP Communicator Administration Tool and select the option to enable the HTTP access.
Now you know One Way Audio Cisco Ip Communicator Vpn
Now that you know One Way Audio Cisco Ip Communicator Vpn, we suggest that you familiarize yourself with information on similar questions.
