Isdn Outgoing-Voice Info-Transfer-Capability 3.1khz-Audio

We have collected the most relevant information on Isdn Outgoing-Voice Info-Transfer-Capability 3.1khz-Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.

isdn outgoing-voice — interface - Cisco IOS in a Nutshell ...

https://www.oreilly.com/library/view/cisco-ios-in/0596008694/re483.html

Name isdn outgoing-voice — interface Synopsis isdn outgoing-voice {info-transfer-capability {3.1kHz-audio | speech}} no isdn outgoing-voice Configures Information transfer capability set for outgoing voice calls Default None Description This command sets … - Selection from Cisco IOS in a Nutshell, 2nd Edition [Book]

Solved: mgcp outgoing issue - Cisco Community

https://community.cisco.com/t5/ip-telephony-and-phones/mgcp-outgoing-issue/td-p/2642618?attachment-id=76094

1) 'transfer-information' is set to 3.1k audio on their call. I don't recall noticigin this before, but you can set your ISDN to send the same using this command: isdn outgoing-voice info-transfer-capability 3.1kHz-audio

Cisco 3640 路由器与远程用户在 V.110 模式下的回呼

https://www.cisco.com/c/zh_cn/support/docs/dial-access/asynchronous-connections/6153-callback-6153.pdf

isdn incoming-voice modem isdn outgoing-voice info-transfer-capability 3.1kHz-audio no cdp enable ppp authentication chap callin! interface BRI3/1 description belgacom 027202094 no ip address encapsulation ppp isdn switch-type basic-net3 isdn incoming-voice modem no cdp enable! interface Group-Async1 ip unnumbered Dialer1 encapsulation ppp ...

Retorno de chamada entre um roteador Cisco 3640 e …

https://www.cisco.com/c/pt_br/support/docs/dial-access/asynchronous-connections/6153-callback-6153.pdf

Common Causes for BRI/PRI Outgoing Call ... - Yeastar Support

https://support.yeastar.com/hc/en-us/articles/360022635213-Common-Causes-for-BRI-PRI-Outgoing-Call-Failure

1. Incorrect DOD Setting. You might receive Hangup cause in DISCONNECT message like the following: To fix this issue, please fill the correct DOD in the BRI/PRI trunk setting. 2. Incorrect TON (Type of Number) - If you don't which TON to use, please use Unknown. - If your inbound calls are working, you can refer the TON used in the incoming ...

Common Causes of BRI/PRI Incoming Call Failure - Yeastar

https://support.yeastar.com/hc/en-us/articles/360022455874-Common-Causes-of-BRI-PRI-Incoming-Call-Failure

Then you need to understand the BRI/PRI call flow and a few elements in Q.931 messages by followed this article: A Brief View of the PRI Call Flow. 1. Incorrect DID settings. Sometime the provider doesn't send a line number as DID number in the incoming SETUP message. It could be a short number like extension number or so.

Callback Between a Cisco 3640 Router and a Remote User in ...

https://www.cisco.com/c/en/us/support/docs/dial-access/asynchronous-connections/6153-callback-6153.html

Users connecting 3640 via ISDN (data) and requesting callback. ... /0:15 description E1 0451/39920 no ip address encapsulation ppp dialer rotary-group 1 isdn switch-type primary-net5 isdn incoming-voice modem isdn outgoing-voice info-transfer-capability 3.1kHz-audio no cdp enable ppp authentication chap callin ! interface BRI3/1 description ...

Now you know Isdn Outgoing-Voice Info-Transfer-Capability 3.1khz-Audio

Now that you know Isdn Outgoing-Voice Info-Transfer-Capability 3.1khz-Audio, we suggest that you familiarize yourself with information on similar questions.