6sk7 Audio Schematic | Audio-Digital.net

We have collected the most relevant information on 6sk7 Audio Schematic. Open the URLs, which are collected below, and you will find all the info you are interested in.

6SK7 6SK7GT - PoC-Net

https://frank.pocnet.net/sheets/127/6/6SK7.pdf

Title: 6SK7 6SK7GT Author: Tung-Sol Subject: FP-2004-06-13 Created Date: 6/13/2004 9:44:45 PM

Dave's Homemade 6K7/6SK7 Tube Regenerative Radio Page

http://makearadio.com/tube/6k7-dx-radio.php

The antenna is connected to a separate board using a dual section variable capacitor and a 660/46 litz wire coil. This circuit is on the left side of the schematic at the bottom of this page. My #35 and 50 set pages show the input network. So I won't discuss that much here. The regenerative detector centers around the use of a 6K7 tube that I had.

BUILDING A PARASET - QSL.net

https://qsl.net/ve7sl/paraset.html

THE CIRCUIT A look at the circuit schematic shown below will illustrate what is involved in making a Paraset. ... The two-tube receiver utilizes a 6SK7 oscillating detector to drive another 6SK7 audio amplifier. Regeneration is smoothly controlled by varying the detector's screen voltage (R5) while the second stage provides ample volume to a ...

tube limiter – Preservation Sound

http://www.preservationsound.com/tag/tube-limiter/

The 864 is a simple, rugged device that accepts 600 ohm balanced or unbalanced line-level signal, offers a single front-panel input-attenuator control, and compresses the output level at a 10-to-1 ratio once the threshold point is reached. The output is also 600-ohm balanced or unbalanced, and it offers a maximum 36db of gain.

6sk7 regen | Page 2 | QRZ Forums

https://forums.qrz.com/index.php?threads/6sk7-regen.630265/page-2

The 01 / 01A series, which were used in early battery TRF and regen receivers, have a 5.0-volt filament. The "A" variants are best because the filament drain is 250 mA versus 1.0 amperes for the non-"A" versions. The 33 vacuum tube …

Now you know 6sk7 Audio Schematic