We have collected the most relevant information on Zaph Audio Zrt 2.5-Way Revelator Tower Review. Open the URLs, which are collected below, and you will find all the info you are interested in.
Design Review for First DIY Towers (Zaph ZRT 2.5 Way ...
https://www.avsforum.com/threads/design-review-for-first-diy-towers-zaph-zrt-2-5-way.1144310/
Front ports may re-enforce the low end, but there's always the chance of mechanical driver noise leaking out although i doubt the Revelators produce any. Since its' a 2.5 way, the lower woofer position is somewhat variable. Too high up and you loose the advantage of the reduced floor bounca and too low and vertical lobing begins below 200hz.
My DIY Zaph Audio ZRT speaker build | Audio Science …
https://www.audiosciencereview.com/forum/index.php?threads/my-diy-zaph-audio-zrt-speaker-build.16186/
The ZRT's are small towers utilizing high quality Scan-Speak drivers, namely: Illuminator D3004/6600 AirCirc Tweeter Textile Dome, and; ScanSpeak Revelator 18W/8531G-00 7" Mid Woofer 8 ohm; I selected the 2-way vented alternative versu the 2.5-way closed box because I deemed it would yield enough bass and better suited my budget. The specs ...
Opinions on the Zaph Audio ZRT Revelator Towers
https://forum.audiogon.com/discussions/opinions-on-the-zaph-audio-zrt-revelator-towers
I have used the revelator drivers in my car audio systems, as well as the Scan tweeters, and they would play louder than most any speakers of that size that I have ever heard. Loud is not dynamic. I just finished the 2-way design with premium x-over parts and home-made boxes. These are replacing Maggie 3.6Rs.
REVIEW: Zaph Audio (DIY designs) Zaph Audio ZRT Revelator ...
https://www.audioasylum.com/audio/speakers/messages/36/360693.html
I was put on to Zaph Audio's 'ZRT' Revelator Towers by Madisound's kit for those speakers. Zaph's very comprehensive web pages for these speakers satisfied me they just might be up to my DIY goal of replacing my Maggies. The ZRT designs were for both 2-way and 2.5 way speakers. See Madisound's ZRT 2-way kit page Also see Zaph Audio's ZRT web page.
Zaph|Audio ZRT 2.5-Way, Revelator Tower Parts Only - PAIR
https://www.madisoundspeakerstore.com/2.5-way-speaker-kits/zaph%7Caudio-zrt-2.5-way-revelator-tower-parts-only-pair/
The ZRT is an extremely versatile premium speaker kit utilizing Scan-Speak Revelator drivers. The 2.5-Way configuration is best as a larger ported tower design.For those planning to integrate with a sub, a smaller sealed box is also possible. The tweeter used is the extremely popular Scan-Speak Illuminator “AirCirc” D3004/6600 1" soft dome.
Design Review for First DIY Towers (Zaph ZRT 2.5 Way ...
https://www.avsforum.com/threads/design-review-for-first-diy-towers-zaph-zrt-2-5-way.1144310/page-2
Design Review for First DIY Towers (Zaph ZRT 2.5 Way) Jump to Latest Follow ... Gain the look of the tower via how i explained earlier in this thread. ... dual subs co-located even better as the extra Revelator will be replaced with a dedicated sub driver and power channel. If you want to save some money...build that instead!
Now you know Zaph Audio Zrt 2.5-Way Revelator Tower Review
Now that you know Zaph Audio Zrt 2.5-Way Revelator Tower Review, we suggest that you familiarize yourself with information on similar questions.
