We have collected the most relevant information on Xine Was Unable To Initialize Any Audio Drivers Suse 10.2. Open the URLs, which are collected below, and you will find all the info you are interested in.


Solved-"xine was unable to initialize any audio drivers"

    https://www.linuxquestions.org/questions/linux-hardware-18/solved-xine-was-unable-to-initialize-any-audio-drivers-523184/
    If you received the dreaded "xine was unable to initialize any audio drivers" message please do the following. First, go to yast, select Hardware, then Sound and make sure that your sound card/audio controller is configured and any other one is deleted. You have probably done this already and everything is ok. This is insufficient on its own.

xine was unable to initialize any audio drivers

    https://forum.ubuntu.ir/index.php?topic=4917.0
    نویسنده موضوع: xine was unable to initialize any audio drivers (دفعات بازدید: 1739 بار) 0 کاربر و 1 مهمان درحال مشاهده موضوع. sinoohe

The xine Video Player HOWTO

    http://dvd.sourceforge.net/xine-howto/en_GB/html/howto.html
    10.2 xine keeps complaining about not being able to connect to a socket; 10.3 I use a kernel between 2.4.10 and 2.4.15 inclusive and xine and am getting strange errors; 10.4 I don't get a DVD button in xine; 10.5 All seems good but halfway through a DVD the playback stops or loops; 10.6 I get this message: demux error! 00 00 00 (should be 0x000001)

MJPG error - (ERROR)icvOpenAVI_XINE(): Unable to ...

    https://answers.opencv.org/question/76769/mjpg-error-erroricvopenavi_xine-unable-to-initialize-video-driver/
    Stats. Asked: 2015-11-19 18:57:09 -0500 Seen: 1,414 times Last updated: Nov 19 '15

13 Methods to Fix This Device Cannot Start (code 10) Error

    https://recoverit.wondershare.com/computer-problems/this-device-cannot-start-code-10-error.html
    Select the "Driver" tab on the "Properties" pop-up window. Scan through to locate "Roll Back Drivers" buttons and read the description against this tab: If the device fails after updating the driver, roll back to the previously installed driver. Click on "Roll Back Driver" to continue. Method 4: Update the drivers for this device

nl80211: Could not configure driver mode, wlan1: Failed …

    https://www.fatalerrors.org/a/could-not-configure-driver-mode-failed-to-initialize-driver-interface.html
    Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz Current Frequency=2.412 GHz (Channel 1) Two. connected to WiFi wireless signals which chan=13 2.1 start the wireless network card (my USB wireless network card name is wlan1) sudo ifconfig wlan1 up

usb_modeswitch not working; lsusb indicate "unable to ...

    https://www.linuxquestions.org/questions/linux-newbie-8/usb_modeswitch-not-working%3B-lsusb-indicate-unable-to-initialize-libusb-99-%3B-howto-4175465972/
    by connecting a usb gsm modem on a selfbuild kernel, the usb is recognized because dmesg show messages like "New USB device found, idVendor=0af0, idProduct=7a01.." but usb_modeswitch say "No devices in default mode found.." and the modem is not modeswitched. The command lsusb gives "unable to initialize libusb: -99".

Unable to Initialize HDD | Tom's Hardware Forum

    https://forums.tomshardware.com/threads/unable-to-initialize-hdd.1294148/
    1. Turn off the computer (my Win 10). 2. Disconnect the data and power cables from the problematic drive. 3. Remove the CMOS battery for ten more seconds. 4. Insert the CMOS battery. 5. Turn on the...

RetroPie : unable to initialize SDL - Raspberry Pi Forums

    https://forums.raspberrypi.com/viewtopic.php?t=36866
    RetroPie : unable to initialize SDL. Tue Mar 12, 2013 8:07 am . ... You can start it with the dummy video driver if you only need it for audio or if you intend to use opengl es for your display handling, but at that moment, it's keyboard / mouse events aren't working either. ... This would mean that sdl could use the dummy video driver I assume.

Steinberg ASIO driver "not connected" - PG Music Forums

    https://www.pgmusic.com/forums/ubbthreads.php?ubb=showflat&Number=508631&page=all
    ""YAMAHA STEINBERG USB ASIO" ASIO driver is not connected, so audio output will be silent" (the first time I select the driver in the menu) from then on when I select the Steinberg driver I receive directly the message "GetChannels failed". All my music programs (notation, DAW etc.) are working fine with this driver. Any suggestion? Thanks. Stefano

Now you know Xine Was Unable To Initialize Any Audio Drivers Suse 10.2

Now that you know Xine Was Unable To Initialize Any Audio Drivers Suse 10.2, we suggest that you familiarize yourself with information on similar questions.