We have collected the most relevant information on Wine Pulseaudio Tsched=0. Open the URLs, which are collected below, and you will find all the info you are interested in.
udev - For pulseaudio what does tsched do (and what are ...
https://askubuntu.com/questions/371595/for-pulseaudio-what-does-tsched-do-and-what-are-the-defaults
tsched Since 0.9.11. Use system-timer based model (aka glitch-free). Defaults to 1 (enabled). If your hardware does not return accurate timing information (e.g. Creative sound cards) you can try to set tsched=0 to enable the interupt based timing which was used in 0.9.10 and before. However I have two machines (different hardware), one which returns tsched=yes and one …
Troubleshooting Sound Issues | Knowledge Base | …
https://www.codeweavers.com/support/wiki/linux/faq/SoundTrouble
And add tsched=0 to the end so that the above example would look like this: if there are other parameters in this line, do not delete them, simply add tsched=0 to the end of the line. load-module module-udev-detect tsched=0 After making the adjustment, restart PulseAudio from terminal with: pulseaudio -k Tell PulseAudio to use less memory
[Solved] Crackling sound in Wine / Multimedia and Games ...
https://bbs.archlinux.org/viewtopic.php?id=165651
Also, having to set tsched=0 is indicative of a bad ALSA driver and really screws with latency/power management - did you look for or file a bug report over it on the tracker the page mentioned. If you are using pulse, just bite the compile-time bullet and install `wine-multimedia` from the AUR; the patchset includes actual PulseAudio support and your …
46296 – Sometimes the PA server needs a restart.
https://bugs.freedesktop.org/show_bug.cgi?id=46296
The attached log shows PulseAudio's output when starting WoW with tsched=0 set. In Wine's output, when the crackling starts, I see the following message repeated twice: ALSA lib pcm.c:7339:(snd_pcm_recover) underrun occurred ALSA lib pcm.c:7339:(snd_pcm_recover) underrun occurred I am not sure if this is a PulseAudio problem or a problem with the ALSA …
Low-latency osu! on Linux – ThePooN's Blog
https://blog.thepoon.fr/osuLinuxAudioLatency/
You should set the tsched value to 0. Time-based scheduling (tsched=1) guarantees a more consistent audio playback, but makes going down in latency way harder/impossible. Interrupt-based scheduling (tsched=0) works way better in these conditions. You should reboot your system now to apply the newer security limits and PulseAudio settings.
Now you know Wine Pulseaudio Tsched=0
Now that you know Wine Pulseaudio Tsched=0, we suggest that you familiarize yourself with information on similar questions.
