We have collected the most relevant information on Vx-7r Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.


Welcome to Yaesu.com

    https://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=111&encProdID=8D3254BFC69FB172D78647DC56EFB0E9
    Utilizing a reliable FET power amplifier circuit, the VX-7R provides a full 5 Watts of power output on the 50, 144, and 430 MHz Amateur bands, with bonus coverage of the 222 MHz band at 300 mW (USA version only). And for 6-meter AM …

Yaesu VX-7R User Manual - QRZCQ

    https://qrzcq.com/pub/RADIO_MANUALS/YAESU/YAESU--VX-7R-User-Manual.pdf
    2 VX-7R OPERATINGMANUAL CONTROLS& CONNECTIONS ANTENNA Connect the sup- plied rubber flex an- tenna (or another antenna presenting a 50-Ohm imped- ance) here. VOLUME This control adjusts the audio volume level. Clockwise ro- tation increases the volume level. DIAL

Yaesu VX-7R VX-7RB Amateur HT VX7R - Universal Radio

    https://www.universal-radio.com/catalog/ht/0777.html
    The Yaesu VX-7R is a triple-band (6M, 2M & 440 MHz) HT with extensive receive coverage, and leading-edge features. The American version even transceivers with 300 mW on the 220 band. Power output on 6 meters, 2 meters and 440 MHz is 5/2.5/1/0.5 watts. It receives the AM and FM broadcast bands, shortwave (AM), VHF and UHF TV audio, VHF Air and public service …

Help with low audio vx7r? | WorldwideDX Radio Forum

    https://www.worldwidedx.com/threads/help-with-low-audio-vx7r.142845/
    Help with low audio vx7r? | WorldwideDX Radio Forum. You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs. Dismiss Notice.

VX-7R Circuit Description

    https://www.hayseed.net/~jpk5lad/K5LAD%20files/Yaesu_VX-7R/VX7%20Circuit%20Description.pdf
    VX-7R Circuit Description The VX-7R consists of a RF-UNIT, a CNTL-UNIT and an AF-UNIT. The RF-UNIT contains the receiver front end, PLL IC, power and switching circuits, and the VCO-UNIT for transmit and receive local signal oscillation. The CNTL-UNIT contains the CPU, and audio ICs, and the power circuitry for the LCD.

VX-7R | QRZ Forums

    https://forums.qrz.com/index.php?threads/vx-7r.116601/
    Some of VX-7R's are known to produce extremely low audio. Here is the fix to bring the TX audio to proper levels: 1. With the radio in VFO mode, turn it off. 2. Press the "MON F", "Wires" key (the one at the far corner of the key pad) and the "0" key. 3. Continue to hold down these 3 buttons, power up the radio.

VX-7R allowing audio through 2 PL tones | RadioReference ...

    https://forums.radioreference.com/threads/vx-7r-allowing-audio-through-2-pl-tones.155002/
    Got a VX-7R months ago and have come to like the unit, however I have encountered one small issue that I can hopefully rectify with your assistance! When on a frequency and trying to "search" for the PL tone, the unit occasionally allows audio to pass through two tones next to each other...

Yaesu VX-7R transmit problems - YouTube

    https://www.youtube.com/watch?v=2FO3Ohmf1vU
    Yaesu VX-7R transmit problems when in dual band mode. Intermittent audio while transmitting.

Yaesu VX-7R very quiet on air band - RadioReference.com Forums

    https://forums.radioreference.com/threads/yaesu-vx-7r-very-quiet-on-air-band.270900/
    Jul 20, 2013. #1. I bought my Yaesu VX-7R not too long ago mainly because I wanted an upgrade from my trusty Baofeng radio, but I also wanted it for its wide-band receive, chiefly the air band. I'll be going to the Oshkosh airshow in just a few days and I'll be listening to the tower with this radio which will be interesting.

Yaesu VX-series sensitivity issue repair

    http://pages.cs.wisc.edu/~timc/e/vx7r.html
    Yaesu VX-series sensitivity issues. There seems to be a failure mode in some Yaesu VX-6R, VX-7R -- and maybe the VX-5R handheld radios -- where they lose almost all sensitivity in NBFM mode. They're fine for WBFM demodulation in the FM broadcast band. This problem is caused by failure of the 450kHz ceramic filter.

Now you know Vx-7r Audio

Now that you know Vx-7r Audio, we suggest that you familiarize yourself with information on similar questions.