We have collected the most relevant information on Vivid Audio B1 Loudspeaker. Open the URLs, which are collected below, and you will find all the info you are interested in.
Vivid Audio B1 loudspeaker - Stereophile.com
https://www.stereophile.com/content/vivid-audio-b1-loudspeaker
The B1 uses a 6.25" aluminum-cone woofer operating below 900Hz and loaded by a flared port below it on the baffle, a 2" aluminum-dome midrange unit to cover the range from 900Hz to 4kHz, and a 1" aluminum-dome tweeter.
Vivid Audio B1 Loudspeaker | Uncrate
https://uncrate.com/vivid-audio-b1-loudspeaker/
Vivid Audio B1 Loudspeaker If your current audio setup leaves something to be desired, and you happen to have a boatload of cash, the Vivid Audio B1 Loudspeaker ($13,500/pair) may be just what you're looking for. The B1s incorporate four drivers in a dead-sexy enclosure that delivers dynamite sound.
Vivid Audio B1 loudspeaker Specifications | …
https://www.stereophile.com/content/vivid-audio-b1-loudspeaker-specifications
Vivid Audio B1 loudspeaker Specifications. Description: Three-and-a-half-way, reflex-loaded, floorstanding loudspeaker. Drive-units (all aluminum): D26 1" (26mm) dome tweeter, D50 2" (50mm) dome midrange driver, two C125 6.25" (158mm) cone woofers. Crossover frequencies: 100Hz, 900Hz, 4kHz. Frequency response: 39Hz–41kHz, ±2dB, 35Hz–44kHz ...
Vivid B1 Decade standmount loudspeakers - Hi-Fi+
https://hifiplus.com/articles/vivid-b1-decade-standmount-loudspeakers/
Vivid B1 Decade standmount loudspeakers REVIEW Jason Kennedy Nov 2016 A A A It’s anniversary time again, this time for Vivid Audio, which celebrated its 10th birthday recently. To mark the occasion, designer Laurence ‘Dic’ Dickie went back to the first speaker he created for the company: the B1.
OVAL RANGE – Vivid Audio
https://vividaudio.com/oval/
Like all Vivid Audio loudspeakers, the B1 Decade is instantly recognisable thanks to its radical design. In a market still dominated by square cabinet speakers, the B1 Decade stands out as a perfect example of form truly following function. It takes its inspiration from nature, where there are no straight edges, right angles or flat plane surfaces.
Vivid Audio B1 loudspeaker Measurements | …
https://www.stereophile.com/content/vivid-audio-b1-loudspeaker-measurements
My estimate of the Vivid B1's voltage sensitivity was a little lower than specified, at 87dB (B)/2.83V/m, which is about average. The speaker is specified as being a 4 ohm load, presumably because, as can be seen in fig.1, the impedance drops to a minimum of 3 ohms in the low midrange and remains below 6 ohms for most of the region below 700Hz.
Now you know Vivid Audio B1 Loudspeaker
Now that you know Vivid Audio B1 Loudspeaker, we suggest that you familiarize yourself with information on similar questions.
