We have collected the most relevant information on Uv-5r No Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.


baofeng uv-5r no sound | RadioReference.com Forums

    https://forums.radioreference.com/threads/baofeng-uv-5r-no-sound.255927/
    Anybody else experience A no sound problem with the UV-5R. The audio was working good, then nothing. The led green light comes on when receiving, but not even the voice prompt or the key beep produce any sound. I tried the ear buds that came with it also and nothing. Any advice ? C cabletech Member Joined Apr 22, 2012 Messages 871 Location

How to fix no transmit modulation Baofeng UV-5R and ...

    https://www.youtube.com/watch?v=7BrGo1-uW3k
    When a Baofeng suddenly no longer transmits audio, this simple modification will commonly fix the problem.

BaoFeng UV5R No Sound - YouTube

    https://www.youtube.com/watch?v=DPyfpPEpYPs
    BaoFeng UV5R portable radio has no sound although there is a scratchy sound. Volume is turned up to MAX and CTCSS and DCS codes are off.

UV-5R+ no receive audio : Baofeng - reddit

    https://www.reddit.com/r/Baofeng/comments/3kpms5/uv5r_no_receive_audio/
    UV-5R+ no receive audio. I can transmit okay, and folks can understand me okay, but there's no audio when I receive something. Lights go on, LCD indicates it's receiving, volume is up, squelch is low, but nothing. I have tried the speaker/mic, and just the built-in speaker, but nothing. Someone suggested I reset the radio to factory specs ...

Baofeng UV-5R No Audio on Xmit | QRZ Forums

    https://forums.qrz.com/index.php?threads/baofeng-uv-5r-no-audio-on-xmit.373870/
    Baofeng UV-5R No Audio on Xmit. Discussion in 'Amateur Radio Software' started by KF7YED, Dec 30, 2012. Thread Status: Not open for further replies. KF7YED Ham Member QRZ Page. I did search the forum for answers first but haven't found this particular issue.

Baofeng UV-5R Not Transmitting - Transmission1

    https://www.transmission1.net/viewtopic.php?t=38116
    Re: Baofeng UV-5R Not Transmitting. Post. by bigpimp347 » 14 Aug 2013, 11:32. if you have white noise on RX then you are in normal squelch receive not CTCSS receive which is good. if you can TX the tones, but no audio i'd suspect either you have managed to turn the mic gain off. or maybe as daft as it is have you damaged the mic socket on the ...

UV-5R not transmuting audio : Baofeng

    https://www.reddit.com/r/Baofeng/comments/ehc3q6/uv5r_not_transmuting_audio/
    UV-5R not transmuting audio So I use a Baofeng UV-5R and for some reason I can pick up other people’s audio just fine. However when I transmit they get the green receiving light come up but no audio coming through !

How to fix a Baofeng UV-5R that stops receiving after ...

    https://www.buytwowayradios.com/blog/2014/10/how_to_fix_baofeng_uv-5r_stops_receiving_after_chirp_file_upload.html
    The UV-5R has no audio, won't receive unless you press the MONI button, or stops responding altogether. Performing a reset doesn't work to fix the issue. Has the damage already been done? First, don't panic. You haven't damaged your radio. The firmware is permanent, and can't be upgraded, changed, or "flashed".

ht - How do I troubleshoot a Baofeng UV-5R that won't ...

    https://ham.stackexchange.com/questions/2127/how-do-i-troubleshoot-a-baofeng-uv-5r-that-wont-receive
    I have noticed that it does receive when I hold the MONI button, but there's no indication of reception if I don't hold that button down. It appears to behave like the squelch setting is too high, but it's currently set to 3. For what it's worth, the radio still transmits just fine. baofeng ht equipment-troubleshooting uv-5r chirp Share

audio - Trigger PTT on Baofeng UV-5R with Arduino ...

    https://electronics.stackexchange.com/questions/498448/trigger-ptt-on-baofeng-uv-5r-with-arduino
    A current project of mine is to have the Arduino Uno play an audio file off an SD card module. The audio file would come out of the Arduino and into a Baofeng UV-5R handheld transceiver. The first thing that needs to happen is Arduino would trigger Push-To-Talk (PTT) on the radio and then input the audio.

Now you know Uv-5r No Audio

Now that you know Uv-5r No Audio, we suggest that you familiarize yourself with information on similar questions.