We have collected the most relevant information on Usb Audio Tenx. Open the URLs, which are collected below, and you will find all the info you are interested in.
TP6911-HSOP28 USB Audio - tenx
https://www.tenx.com.tw/Files/APNotes/303/AP-TP6911_01EV10.pdf
2 tenx technology, inc. 1/08 2. USB Bus Power connect PWMVDD for Class D Speaker TP6911 PWMVSS PWMVDD PWMVSS 10UF VDD VSS 470P 470P PWMVSS Bead Bead The differential SP+ and SP- pins are designed to drive a 8ohm speaker directly. A coupling capacitor is needed each the SP+/SP- pin and the speaker 3. Microphone Power Circuit MIC+ 10UF TP6911 MIC-AVSS
Avoid the Tenx "3D" USB audio sound cards – The Open Sourcerer
https://fortintam.com/blog/avoid-the-tenx-3d-usb-audio-sound-cards/
kernel: [ 3911.462667] input,hidraw4: USB HID v1.10 Device [USB AUDIO ] on usb-0000:00:1a.2-1 pulseaudio[6542]: alsa-util.c: Device front:2 doesn’t support 44100 Hz, changed to 48000 Hz. pulseaudio[6542]: module-alsa-sink.c: Your kernel driver is broken: it reports a volume range from 0,00 dB to 0,00 dB which makes no sense.
USB Audio devices for SoundStepper
http://soundstepper.sourceforge.net/audio_devices.html
If the windows device name is only an uppercase "USB AUDIO", this is a "True SJ588" (based on chip TP6911 from Tenx, a "D-Class-output" PWM device), good for analog drives; Any devices with another names (like "Generic USB audio device" for example) will be "HY554", "Fake SJ588" or some "B-class-output", many based on CM-108 or CM-109 chipsets, good for pulse/direction …
TP6902 - USB Audio Controller - DataSheetCafe.com
http://www.datasheetcafe.com/TP6902-pdf-27125/
Description : Advance Information DS-TP6902_E USB Full Audio controller TP6902 USB Audio Controller Data Sheet tenx reserves the right to change or discontinue the manual and online documentation to this product herein to improve reliability, function or design without further notice. Tenx does not assume any liability arising out of the application or use of any …
alsa - volume control quirk for Tenx TP6911 Audio Headset ...
https://raspberrypi.stackexchange.com/questions/120335/volume-control-quirk-for-tenx-tp6911-audio-headset
On a fresh install of 2021-01-11-raspios-buster-armhf-lite with dmesg an older, cheap, generic "3D SOUND" USB audio stick for headphone and microphone is detected as [ 480.467295] usb 1-1: New USB device found, idVendor=1130, idProduct=f211, bcdDevice= 5.10 [ 480.467325] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ …
USB\VID_1130 - Tenx Technology, Inc. | Device Hunt
https://devicehunt.com/view/type/usb/vendor/1130
USB: 1130: Tenx Technology, Inc. c301: Digital Photo viewer [Wallet Pix] Vendor Device USB: 1130: Tenx Technology, Inc. f211: TP6911 Audio Headset: Vendor Device USB: 1130: Tenx …
TP6911 [IAmNotA HomePage]
http://www.iamnota.net/doku.php?id=hw:tp6911
General Description The TP6911 from Tenx Technology is an 8-bit micro-controller embedded device tailored to the USB audio and USB Keyboard application. It's able to play two channels PC Audio and record one channel voice through Full-Speed USB bus. Features Compliance with the Universal Serial Bus specification V2.0 Full-Speed
Fake CM108 USB Audio Devices | KI6ETL – Ham Radio Enthusiast
https://www.ki6etl.org/2021/04/fake-cm108-usb-audio-devices/
These old devices used a chipset (Tenx TP6911) designed for “headsets” and have a fairly poor ADC, with a max of 24 KHz resolution (pretty low). The C-Media 108 chipset has long been considered a decent value chipset, so I went to eBay to find some CM108 based USB devices. I found a listing that was explicitly stating that it had this chipset.
Slug USB Audio - Ultra High
https://ultrahigh.org/2007/03/slug-usb-audio/
This one is identified as being made by Tenx Technology, with USB ids 1130:f211. It works with the snd-usb-audio driver; Amplifier/Reciever/Speakers etc – you need to play the audio through speakers. A decent set of computer speakers will do, or connect the audio output to an input on your hifi system. Setting Things Up
Linux device driver to send AND receive audio over USB ...
https://stackoverflow.com/questions/27261244/linux-device-driver-to-send-and-receive-audio-over-usb
I'm trying to send/receive audio over USB from my embedded linux device to/from a Windows host. I understand there are 2 protocols to send audio over USB - USB Audio Class 1 and 2 (UAC1 & UAC2).
Now you know Usb Audio Tenx
Now that you know Usb Audio Tenx, we suggest that you familiarize yourself with information on similar questions.
