We have collected the most relevant information on Turn On Lead Car Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.


Car Audio Amplifier Troubleshooting

    http://www.caraudiohelp.com/newsletter/car_amp_troubleshooting.html#:~:text=Use%20a%20voltmeter%20and%20check%20the%20voltage%20between,connected%20instead%20of%20the%20remote%20turn%20on%20lead.
    none

Remote turn on lead work around options... | Car Audio ...

    https://www.caraudio.com/threads/remote-turn-on-lead-work-around-options.607109/
    Car Audio Classifieds Wanting to Buy/Trade Classifieds Member Feedback. Help 101. Wiring, ... Due to this understanding, i was skeptical as to being able to "draw" the power FROM the remote turn on lead in a way that would allow the amp to NOT SEE the voltage that is not supposed to be there and therefore turn the amplifier off. BUT IT WORKED!

Remote Turn On Wire: What it is and How to ... - MTX Audio

    https://www.mtx.com/library-remote-turn-on
    Be sure the positive lead is touching the wire strands inside the jacket of the remote turn on wire. With the ignition in the OFF position, there should be no voltage. Then turn the ignition to the ON position and test the same way again. While in the ON position, there should be 12+ volts at the remote turn on wire.

Maestro and Amp Turn On Lead? | DiyMobileAudio.com Car ...

    https://www.diymobileaudio.com/threads/maestro-and-amp-turn-on-lead.435173/
    They do recommend connecting your aftermarket head unit's Remote Amp Turn On lead to the Maestro's turn on lead in the T-harness for the vehicle. Then, for turning on an external amp, t-off (Posi-Tap or soldered lead) this wire to run to your DSP or amp's turn on input.

Car Audio Amplifier Troubleshooting

    http://www.caraudiohelp.com/newsletter/car_amp_troubleshooting.html
    It should be around 12 volts. If it isn't change the head unit to the radio and see if it has voltage then. If it does you probably have the power antenna only lead connected instead of the remote turn on lead. If you do not have voltage in either case then …

Step-by-step Instructions for Wiring an Amplifier in Your Car

    https://www.crutchfield.com/ISEO-rmsbcspd/learn/learningcenter/car/amplifier_installation_guide.html
    Locate the remote turn-on lead behind your radio (usually a blue and white wire), and connect the turn-on lead from your amplifier wiring kit to it. Strip the insulation off a small section of this wire coming from the radio and the turn-on lead that came with your wiring kit and connect them together via solder, a crimp connector, or a Posi-Connector .

Now you know Turn On Lead Car Audio

Now that you know Turn On Lead Car Audio, we suggest that you familiarize yourself with information on similar questions.