We have collected the most relevant information on Tuning Audiocontrol Lc2i. Open the URLs, which are collected below, and you will find all the info you are interested in.
How to setup AccuBASS on the LC2i - AudioControl
https://www.audiocontrol.com/knowledge-base/how-do-i-set-accubass/
On the LC2i, the Threshold knob (screw) is located on the side of the unit between the Main and Bass RCA output connectors. A micro screwdriver will be needed in order to adjust it. It’s also good to note that the Bass knob on the LC2i is for setting the output gain (level) of the Bass output. It does not have anything to do with the AccuBASS ...
LC2i - AudioControl
https://www.audiocontrol.com/car-audio/factory-system-upgrade/lc2i/
The LC2i, is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality pre-amp signals that can then be directed to after-market processors and/or amplifiers.
LC2i User Manual - Home | AudioControl
https://www.audiocontrol.com/downloads/car/current/lc2i/lc2i-user-manual.pdf
thorized AudioControl dealer. You do not have to be the original owner, but you do need a copy of the original sales slip. 4. You cannot let anybody who isn’t (A) the AudioControl factory; (B) somebody authorized in writing by AudioControl to service your LC2i If anyone other than (A) or (B) messes with your LC2i , that voids your warranty. 5.
How do I set the output gains on my line ... - AudioControl
https://www.audiocontrol.com/knowledge-base/set-levels-line-converterprocessoreqcrossover/
When setting the output gain levels on our line converters (LC2i, LC6i, LC7i, LC8i, LCQ-1 etc…) our goal is to match the gain output, with the gain input sensitivity of your aftermarket amplifier. The idea is to send the hottest signal possible out of the converter, without distorting the output of the converter, and also […]
How to power and turn on the LC2i - AudioControl
https://www.audiocontrol.com/knowledge-base/how-to-power-and-turn-on-the-lc2i/
The LC2i requires a +12V in order to run properly. For best results, the +12V should be provided by the battery via direct line or from a power distro-block. The preferred wire gauge for the connection is a 18 AWG, and a 1A fuse is recommended. How does GTO work. GTO or “Great Turn On” signal sense turns on the LC2i.
Need help tuning LC2i with amp | DiyMobileAudio.com Car ...
https://www.diymobileaudio.com/threads/need-help-tuning-lc2i-with-amp.145621/
I adjusted the LC2i to where I thought it should be and proceeded to adjust the amp (with the high pass filter on) as per instructions. It sounds "okay" on some songs, and others sound like crap (some distorted, some have no bass, etc). I have tried tuning it at various stereo volume levels and can't seem to nail it.
Now you know Tuning Audiocontrol Lc2i
Now that you know Tuning Audiocontrol Lc2i, we suggest that you familiarize yourself with information on similar questions.
