We have collected the most relevant information on Transfer Capability 3.1khz Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.
data call for transfer capability=3.1kHz Audio - Cisco ...
https://community.cisco.com/t5/vpn/data-call-for-transfer-capability-3-1khz-audio/td-p/923249
data call for transfer capability=3.1kHz Audio. i cannot establisg a call from bri to E1. Iam doubting part of the debug which shows. will the above message (parameter) allow incoming data calls? 09-25-2007 11:34 AM. 09-25-2007 11:34 AM. The call is coming as either voice or fax/modem. Whic hardware do you have, and what is calling ?
Cisco Bug: CSCef57964 - CCM needs to support 3.1KHz in ...
https://quickview.cloudapps.cisco.com/quickview/bug/CSCef57964
Symptom: Fax machines connected to Callmanager, fail to call PSTN fax machines when gateway is H323 controlled. Conditions: PSTN Fax machines are expecting the 'information transfer capability' to be set to '3.1Khz Audio' within the Bearer Capability. View Bug Details in Bug Search Tool.
How to change the bearer capability on ... - Cisco Community
https://community.cisco.com/t5/other-collaboration-subjects/how-to-change-the-bearer-capability-on-mgcp-gateways/td-p/401774
Our customer used to have a cisco voice gateway 2651XM talking H323 to ccm. We had to change the bearer capability for outgoing calls from speech to 3.1Khz audio. This was achieved by: router (config-if)isdn outgoing-voice info-transfer-capability 3.1khz. Now the customer runs the gateway under MGCP.
isdn outgoing-voice — interface - Cisco IOS in a Nutshell ...
https://www.oreilly.com/library/view/cisco-ios-in/0596008694/re483.html
Name isdn outgoing-voice — interface Synopsis isdn outgoing-voice {info-transfer-capability {3.1kHz-audio | speech}} no isdn outgoing-voice Configures Information transfer capability set for outgoing voice calls Default None Description This command sets … - Selection from Cisco IOS in a Nutshell, 2nd Edition [Book]
Switching between MGCP and SIP - UC Collabing
https://www.uccollabing.com/switching-between-mgcp-and-sip/
Bearer Capability i = 0x9090A3 Standard = CCITT Transfer Capability = 3.1kHz Audio Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA18381 Preferred, Channel 1 Progress Ind i = 0x8A81 – Call not end-to-end ISDN, may have in-band info Calling Party Number i = 0x1183, ‘XXXXXXX’ Plan:ISDN, Type:International
Cisco Bug: CSCsj36533 - ISDN LLC control
https://quickview.cloudapps.cisco.com/quickview/bug/CSCsj36533
Example : ISDN Se1/1:23 BKHL Q931: SETUP pd = 8 callref = 0x0003 Bearer Capability i = 0x9090A2 Standard = CCITT Transfer Capability = 3.1kHz Audio Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98386 Exclusive, Channel 6 Calling Party Number i = 0x2183, '2234567890' Plan:ISDN, Type:National Called Party Number i = 0xA1, '5060' …
Now you know Transfer Capability 3.1khz Audio
Now that you know Transfer Capability 3.1khz Audio, we suggest that you familiarize yourself with information on similar questions.
