We have collected the most relevant information on Transfer Capability = 3.1khz Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.
data call for transfer capability=3.1kHz Audio - Cisco ...
https://community.cisco.com/t5/vpn/data-call-for-transfer-capability-3-1khz-audio/td-p/923249
data call for transfer capability=3.1kHz Audio. i cannot establisg a call from bri to E1. Iam doubting part of the debug which shows. will the above message (parameter) allow incoming data calls? 09-25-2007 11:34 AM. 09-25-2007 11:34 AM. The call is coming as either voice or fax/modem. Whic hardware do you have, and what is calling ?
Cisco Bug: CSCef57964 - CCM needs to support 3.1KHz in ...
https://quickview.cloudapps.cisco.com/quickview/bug/CSCef57964
Symptom: Fax machines connected to Callmanager, fail to call PSTN fax machines when gateway is H323 controlled. Conditions: PSTN Fax machines are expecting the 'information transfer capability' to be set to '3.1Khz Audio' within the Bearer Capability. View Bug Details in Bug Search Tool.
Switching between MGCP and SIP - UC Collabing
https://www.uccollabing.com/switching-between-mgcp-and-sip/
Transfer Capability = 3.1kHz Audio Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA18381 Preferred, Channel 1 Progress Ind i = 0x8A81 – Call not end-to-end ISDN, may have in-band info Calling Party Number i = 0x1183, ‘XXXXXXX’ ...
isdn outgoing-voice — interface - Cisco IOS in a Nutshell ...
https://www.oreilly.com/library/view/cisco-ios-in/0596008694/re483.html
isdn outgoing-voice {info-transfer-capability {3.1kHz-audio | speech}} no isdn outgoing-voice Configures Information transfer capability set for outgoing voice calls Default None Description This command sets the information transfer capability for …
no called party info on isdn q931
https://cisco-voip.puck.nether.narkive.com/G4QpujGg/no-called-party-info-on-isdn-q931
Bearer Capability i = 0x9090A3 Standard = CCITT Transfer Capability = 3.1kHz Audio Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Progress Ind i = 0x8A81 - Call not end-to-end ISDN, may have in-band info Calling Party Number i …
3 Bearer Services - iTecTec
https://itectec.com/spec/3-bearer-services-2/
NOTE 3: The data phase of Bearer Services 61 and 81 will be the same as Bearer Services 20 – 34 with 3,1 kHz Information Transfer Capability. NOTE 4: Bearer Service 23 and 43 are applicable to Mobile Originated (MO) calls only.
SetTransferCapability()
http://www.asteriskdocs.org/en/2nd_Edition/asterisk-book-html-chunk/asterisk-APP-B-361.html
SetTransferCapability() — Sets the ISDN transfer capability of a channel. Synopsis SetTransferCapability(transfercapability) ... 0x10, 3.1kHz Audio (fax calls) DIGITAL_W_TONES. 0x11, unrestricted digital information with tones/announcements. VIDEO. 0x18, video. Note.
Common Causes for BRI/PRI Outgoing Call ... - Yeastar Support
https://support.yeastar.com/hc/en-us/articles/360022635213-Common-Causes-for-BRI-PRI-Outgoing-Call-Failure
3. Incorrect Codec. Same as last one, refer the SETUP message and select the same codec in the incoming SETUP message. < Message Type: SETUP (5) < [04 03 90 90 a3] < Bearer Capability (len= 5) [ Ext: 1 Coding-Std: 0 Info transfer capability: 3.1kHz audio (16) < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) < User information layer 1: A-Law (35)
Call Forward External Issue - Cisco: Call Manager - Tek-Tips
https://www.tek-tips.com/viewthread.cfm?qid=1778643
Transfer Capability = 3.1kHz Audio Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA18381 Preferred, Channel 1 Facility i = 0x9F8B0100A110020236AA06072A8648CE1500040A0100 Protocol Profile = Networking Extensions 0xA110020236AA06072A8648CE1500040A0100 Component = Invoke component …
A.4.7 Bearer Capability Information - iTecTec
https://itectec.com/spec/a-4-7-bearer-capability-information/
A.4.7 Bearer Capability Information. 3GPP 51.010-2 Mobile Station (MS) conformance specification Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification TS. The supplier of the implementation shall state the support of possible bearer capabilities in the tables below. The allowed Bearer Capabilities are defined by ...
Now you know Transfer Capability = 3.1khz Audio
Now that you know Transfer Capability = 3.1khz Audio, we suggest that you familiarize yourself with information on similar questions.
