We have collected the most relevant information on Traktor Audio 10 Bus Powered. Open the URLs, which are collected below, and you will find all the info you are interested in.
REVIEW: NI Traktor Scratch A10 Mk2 Audio Interface - …
http://djworx.com/review-ni-traktor-scratch-a10-mk2-audio-interface/
The big news is the fact the Traktor Scratch A10 can now run on USB bus power. This means you don’t need to plug in the power supply anymore… it’ll run off your computer. You’ll still need external power (still in the box) to run audio through the soundcard in Direct Thru (sic) Mode when it’s not plugged in via USB, but it’s one less thing to worry about when you set up.
Manual - Native Instruments
https://www.native-instruments.com/fileadmin/ni_media/downloads/manuals/traktor/traktor_audio_10_manual_english.pdf
• Before moving the TRAKTOR AUDIO 10, remove all connected cables. • Disconnect the TRAKTOR AUDIO 10’s power supply from the power outlet during thun-derstorms or when leaving the TRAKTOR AUDIO 10 unused for a long period of time. • Do not use excessive force on buttons, knobs, switches and connectors if any parts
Traktor Audio 10 MK2 ? | NI Community Forum
https://www.native-instruments.com/forum/threads/traktor-audio-10-mk2.210640/
My TA10 also works bus powered but has a lower output without the PSU ... noticed it one night after setting up in a hurry and the sound wasn't like normal. Re-plugged the PSU and it came good straight away. Yep .... sticker on the bottom is "Model: Traktor Audio 10 MK2" - was sent from the repair centre on Wednesday Mike mykejb, Nov 8, 2013 #4
External Power Supply and Direct Thru with the TRAKTOR ...
https://support.native-instruments.com/hc/en-us/articles/209551009-External-Power-Supply-and-Direct-Thru-with-the-TRAKTOR-AUDIO-6-10
Windows: C: > Program Files > Native Instruments > Traktor Audio 6 / 10 Driver > "ta6cpl.exe" / "ta10cpl.exe". In the Channel Setup menu, switch to the Startup tab. Note: While the Mac OS X control panel displays only the Channel Setup menu, the Windows control panel displays two additional menus, Audio Settings and Diagnostics.
How to Use TRAKTOR DJ with an External Audio Interface ...
https://support.native-instruments.com/hc/en-us/articles/210300885-How-to-Use-TRAKTOR-DJ-with-an-External-Audio-Interface
Open the Traktor Audio 6 / 10 Control Panel: OS X: Macintosh HD > Applications > Native Instruments > Traktor Audio 10 Driver > "Traktor Audio 6 Control Panel" / "Traktor Audio 10 Control Panel" Windows: C: > Program Files > Native Instruments > Traktor Audio 6 / 10 Driver > "ta6cpl.exe" / "ta10cpl.exe" Go to the Startup tab of the Channel Setup.
Now you know Traktor Audio 10 Bus Powered
Now that you know Traktor Audio 10 Bus Powered, we suggest that you familiarize yourself with information on similar questions.
