We have collected the most relevant information on Starguide Iii Audio Ouput. Open the URLs, which are collected below, and you will find all the info you are interested in.


SG III -1017 Rev A1 - PN | Engineering

    http://engineering.premiereradio.com/files/starguide/Starguide-Receiver_Manual.pdf
    the StarGuide III digital audio receiver. This receiver is capable of delivering multiple audio services in high quality, full 20 kHz, digital audio for your radio station.

StarGuide Receiver Appendix - Engineering

    http://engineering.premiereradio.com/files/starguide/Starguide-Receiver_Appendix.pdf
    A monophonic output is available from the StarGuide III receiver. This output is a sum of left and right audio channels. Do not confuse this output with the dual mono output as described below. Pin 1 Pin 9 Audio Out Wire to Mono (+) Audio Input Wire to Mono (-) Audio Input Automation System, Audio Switch, or Audio Console Input Figure A-1.

ABC GE-8 STARGUIDE III SATELLITE RECEIVER QUICK START

    https://byfbo.com/Documents/Starguide%20Service%20Codes/ABC_OldList.pdf
    ABC GE-8 STARGUIDE III SATELLITE RECEIVER ... • It is critical to make all satellite RF and audio connections prior to applying AC power to the Starguide receiver. • The Starguide III receiver must be powered down before you ... Serial output: 9600 …

StarGuide Receiver Information - Premiere Networks

    http://engineering.premiereradio.com/files/starguide/starg1.html
    Each EDAS or audio decoder card takes up a port in the Starguide III. The ports are labeled A-F. A typical Starguide III from Premiere might have 3 audio decoders and two EDAS cards… in that configuration the Audio decoder cards would be in ports …

Price List - Broadcast Tools

    http://www.broadcasttools.com/pdf/listprice.pdf
    DB-9 output for: ABC XDS, StarGuide II/III, WW1 IDC MAX $74.00 1 COP-2 Connect-O-Pad 2. DB-9F to terminal block adapter with audio output level adjustments for XDS, Wegner iPump, WW1 MAX, NON-Option B SFX, StarGuide II and StarGuide III Satellite receivers. 38.00 1 COP-2/RJ Connect-O-Pad 2 with RJ. DB-9F to StudioHub+ Compatible RJ45 jack

Satellites and Radio: Always something new and exciting

    https://www.radioworld.com/misc-1/satellites-and-radio-always-something-new-and-exciting
    Starguide III receivers will use an upgraded version of Musicam when the transition is made to a new satellite next year. Up in the sky Over the last decade, satellite Satcom C-5 (and its predecessors in the same orbital slot) has been the backbone for many broadcasters’ network audio needs.

Now you know Starguide Iii Audio Ouput

Now that you know Starguide Iii Audio Ouput, we suggest that you familiarize yourself with information on similar questions.