We have collected the most relevant information on Sta Hoontech St Audio Adc&Dac2000. Open the URLs, which are collected below, and you will find all the info you are interested in.
DSP2000 C-Port - ST Audio
http://www.st-audio.de/products/dsp2000/info.html
ST Audio DSP2000 C-Port: "There is no doubt that Hoontech's Soundtrack Audio DSP 24 and ADC/DAC2000 system provides a very flexible range of I/O configurations. The drivers appear to be very suitable for use with software synths and samplers. The international
ST Audio ADC&DAC2000 | L's Gear Depot | Reverb
https://reverb.com/item/33079067-st-audio-adc-dac2000
The ST Audio ADC&DAC2000 is an affordable 24bit/96kHz 8 channel ADC & DAC unit for home studio applications.I acquired this retro tech some time ago and never got around to using it. At this point it is taking up unnecessary space and I would like for some one to take it off my hands.
Staudio (Hoontech) - DSP24, ADC&DAC 2000, DSP2000 C-Port ...
https://www.casopismuzikus.cz/novinky/staudio-hoontech-dsp24-adcdac-2000-dsp2000-c-port
DSP24 je 100% Full Duplex PCI karta pro mastering a záznam s podporou 24 bit/96 kHz, vybavena analogovým stereo line vstupem (1/8" mini-jack) a digitálním …
Hoontech DSP2496 + ADC&DAC2000 - The best budget ASIO ...
http://www.dancetech.com/item.cfm?threadid=432
Hoontech DSP2496 + ADC&DAC2000 About a year ago around the www there was talk & murmurings about the 'Hoontech' audio PC hardware, so I decided to check it out and discovered that their site was a terrible designed mish-mash of 'multiple configurations' with so much emphasis on 'mix & match' permeatations that it was impossible without serious …
ST Audio ADC & DAC2000 SCAD-500 external Breakout Box ADC ...
https://www.bizsurplus.ecrater.com/p/22023442/st-audio-adc-dac2000-scad-500
Input 1/2 with balanced XLR and unbalanced 1/4" connectors, gain controls, Peak-LEDs and phantom power (+48V) switch. Use input 1/2 to connect microphones to the ADC&DAC2000. Note that you cannot use the XLR input of channel 1 (or 2) when the 1/4" input of channel 1 (or 2) is used at the same time.
Note: To avoid damage of your speakers ... - ST Audio Central
http://www.staudio.de/data/DSP2000.pdf
ADC&DAC2000 – front 1. Stereo headphone output (1/4") with gain control; sends out the same signal as Output 1/2. 2. Input 1/2 with balanced XLR and unbalanced 1/4" connectors, gain controls, Peak -LEDs and phantom power (+48V) switch. Use input 1/2 to connect microphones to the ADC&DAC2000.
Now you know Sta Hoontech St Audio Adc&Dac2000
Now that you know Sta Hoontech St Audio Adc&Dac2000, we suggest that you familiarize yourself with information on similar questions.
