We have collected the most relevant information on Spi Audio Codec. Open the URLs, which are collected below, and you will find all the info you are interested in.


Serial Peripheral Interface (SPI) with Audio Codec Support

    https://ww1.microchip.com/downloads/en/DeviceDoc/70005136a.pdf
    Serial Peripheral Interface (SPI) with Audio Codec Support Register 2-1: SPIxCON1L: SPIx Control Register 1 Low R/W-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 SPIEN(3) — SPISIDL DISSDO MODE32(1,4) MODE16(1,4) SMP CKE(1) bit 15 bit 8 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 SSEN(2) CKP MSTEN DISSDI DISSCK MCLKEN(3) SPIFE ENHBUF bit 7 bit 0 Legend:

I2C, SPI Audio CODECs – Mouser

    https://www.mouser.com/c/semiconductors/audio-ics/audio-codecs/?interface%20type=I2C%2C%20SPI
    Audio CODECs: Audio CODEC, Stereo: 192 kHz: I2C, SPI: 2 DAC: 1.9 V to 3.6 V - 40 C + 85 C: SMD/SMT: VQFN-24: Reel

004 - ZedBoard Audio Codec SPI Controller | RTL Audio Lab

    https://rtlaudiolab.com/blog/004-zedboard-audio-codec-spi-controller
    Written By Isaac Verdu. In this post we implement the SPI Controller logic that will configure the ADAU1761 audio codec in our ZedBoard Audio Processor design. The SPI Controller is the third of the four major components in our ZedBoard Audio Processor design’s top level, as mentioned in a previous post. As shown in Figure 1, the SPI Controller logic is …

NAU8811 Mono Audio Codec with SPI - Nuvoton

    https://www.nuvoton.com/resource-files/NAU8811DatasheetRev2.5.pdf
    Mono Audio Codec with SPI emPowerAudio™ 1. GENERAL DESCRIPTION The NAU8811 is a cost effective and low power wideband MONO audio CODEC. It is designed for voice telephony related applications. Functions include Automatic Level Control (ALC) with noise gate, PGA, standard audio interface I2S, and PCM with time slot assignment. The device provides one differential …

ZYNQ: Using the Audio Codec (Bidirectional SPI IP-Core ...

    http://www.harald-rosenfeldt.de/2017/12/29/zynq-using-the-audio-codec-bidirectional-spi-ip-core/
    Since we want to talk to the audio codec ADAU1761, we should probably have a look at the datasheet. Particularly interesting for us is the SPI timing: Noteworthy is that the SS or “Slave Select” is low-active. The MOSI data (this is the data from the SPI controller to the chip, or master-out-slave-in) is accepted at the rising edge of SCLK.

TLV320AIC3254 Ultra Low Power Stereo Audio …

    https://www.ti.com/lit/gpn/TLV320AIC3254
    Audio serial data bus (secondary) ADC word clock input Audio serial data bus (secondary) data input General Purpose Input I2C interface serial clock (SPI_Select = 0) 9 SCL/SS DI SPI interface mode chip-select signal (SPI_Select = 1) I2C interface mode serial data input (SPI_Select = 0) 10 SDA/MOSI DI SPI interface mode serial data input (SPI_Select = 1)

PIC3MX695F512H, SPI interface to Audio Codec | Microchip

    https://www.microchip.com/forums/m846696.aspx
    Re: PIC3MX695F512H, SPI interface to Audio Codec 2015/02/17 00:52:07 4.5 (2) TI's TLV320AIC23B can interface in 'DSP' mode which works with the PIC32 set to framed SPI.

Low-Power, High-Performance, Dual I²S, Stereo Audio …

    https://www.maximintegrated.com/en/products/analog/audio/MAX9880A.html
    Audio quality is further enhanced with user-configurable digital filters for voice and audio data. Voiceband filters provide extra attenuation at the GSM packet frequency and greater than 70dB stopband attenuation at f S /2. An I²C or SPI™ serial interface provides control for volume levels, signal mixing, and general operating modes.

Interfacing an I2S Device to an MSP430 Device

    https://www.ti.com/lit/an/slaa449a/slaa449a.pdf
    desirable that the microprocessor support an audio bus to allow for interconnection to an audio CODEC. This application note describes how to create an …

AP32072 PCM Codec Connection to TC1130

    https://www.infineon.com/dgdl/ap3207210_Codec_1130.pdf?folderId=5546d4694909da4801490a075148059c&fileId=db3a304412b407950112b41b4f702c3f&ack=t
    the Serial Synchronous Channel (SPI type interface) of the TC1130. This type of connection is required for all th e audio applications which uses a codec and, also, for applications where a PCM channel is used (for example a Bluetooth

Now you know Spi Audio Codec

Now that you know Spi Audio Codec, we suggest that you familiarize yourself with information on similar questions.