We have collected the most relevant information on Send Audio Through Firewire. Open the URLs, which are collected below, and you will find all the info you are interested in.
Audio via FireWire - Audio - Arduino Forum
https://forum.arduino.cc/t/audio-via-firewire/189037
The original release of IEEE 1394-1995 specified what is now known as FireWire 400. It can transfer data between devices at 100, 200, or 400 Mbit/s half-duplex data rates (the actual transfer rates are 98.304, 196.608, and 393.216 Mbit/s, i.e., 12.288, 24.576 and 49.152 megabytes per second respectively).These different transfer modes are commonly referred to …
How do I play audio through firewire? - Questions ...
https://answers.presonus.com/16507/how-do-i-play-audio-through-firewire
(The graphic doesn't seem to be posting correctly, but it is a picture of the Windows mixer playing sound.) Windows appears to be set up and trying to play, but no sound is coming out. This is what I see in the AI Mixer: (The image does not seem to be coming through, but the AI mixer FireWire channels do not indicate sound.)
Audio/video simultanious through firewire? - Videomaker
https://www.videomaker.com/community/forums/topic/audiovideo-simultanious-through-firewire
Large blocky artifacts and other bad stuff will happen, and you would have to capture twice if you wanted to capture your audio through the mixer. Once for the audio once for the video. In the way that the previous poster said. I would use the fire wire port on that mixer if you do it this way just to have one less A/D conversion. Although you would probably be better …
Firewire To HDMI - Planet HiFi
https://planethifi.com/firewire-to-hdmi/
The two connections have different purposes that cannot cooperate in one cable. Data is transported via Firewire in a similar way to via USB, it doesn’t matter what kind of data it is. Only pictures and sound are sent via an HDMI connection. CONNECTING FIREWIRE TO HDMI IN AN INPUT HDMI INTERFACE OF A TELEVISION.
StudioLive RM Series - Windows Audio (WDM) Routing and ...
https://support.presonus.com/hc/en-us/articles/210047573-StudioLive-RM-Series-Windows-Audio-WDM-Routing-and-Playback
1. Right-click on the Speaker in the System Tray of Windows and click "Playback devices." 2. The RM series mixers are part of the FireStudio family of firewire interfaces. On the Playback tab, click on the "Presonus FireStudio" device and click "Set Default." Then, click "Ok."
Ethernet Audio - Sound on Sound
https://www.soundonsound.com/techniques/ethernet-audio
The ‘Audio’ part of AVTP is actually an AVB-specific adaptation of an existing open standard that many readers may recognise. Though long since standardised as AM824 (in IEC 61883-6), it is actually the protocol originally developed by Yamaha for mLAN, and subsequently used by just about every FireWire audio interface on the market.
Send DV through Firewire to a DVD recorder - VideoHelp
https://forum.videohelp.com/threads/264295-Send-DV-through-Firewire-to-a-DVD-recorder
Send DV through Firewire to a DVD recorder. A couple of months ago there was a thread in the DVD Recorder forum about recording video on a DVDR that originates in your PC and is sent over a Firewire connection. I said that the Panasonic DMR-ES20 would not record such video. As it turns out, that's not 100% correct.
Firewire to SPDIF - High-End Audio Discussion Forum
https://forum.audiogon.com/discussions/firewire-to-spdif
suggest you use this cable, or one of equal quality, for optimum audio performance. If your computer is. equipped with a four-pin interface, you will need to use the included four-pin to six-pin FireWire cable. Note that the FireWire Solo requires a six-pin FireWire connection in order to supply bus power; if you have.
Routing Audio through 15/16 "Main Mix" on a StudioLive 16 ...
https://support.presonus.com/hc/en-us/articles/210047193-Routing-Audio-through-15-16-Main-Mix-on-a-StudioLive-16-0-2
1. Open Virtual StudioLive (Universal Control), click on "Setup" and make sure that the "Flexible inputs router" (as expressed on page 37 of the Software Reference Manual above) is set to "Main Mix L/R" on Channel 15/16 input. 2.
Now you know Send Audio Through Firewire
Now that you know Send Audio Through Firewire, we suggest that you familiarize yourself with information on similar questions.
