We have collected the most relevant information on Restarting Pulseaudio Server. Open the URLs, which are collected below, and you will find all the info you are interested in.
Pulseaudio sound server configuration · GitHub
https://gist.github.com/morgoth/1468756#:~:text=%23%20Restart%20pulseaudio%3A%20sudo%20%2Fetc%2Finit.d%2Fpulseaudio%20restart%20%23%20Now,able%20to%20run%20from%20your%20local%20machine%20i.e.
How to Restart PulseAudio Sound Server in Ubuntu Linux?
https://www.hecticgeek.com/how-to-restart-pulseaudio-sound-server-ubuntu-linux/
pulseaudio -k. After issuing the command in Ubuntu you should see the audio icon changes into something similar as shown above. Just wait for few seconds and after the restarting process is completed you should see the default PulseAudio icon in your notification area again as shown below. That’s it.
How to Fix pulseaudio issues in Linux - Appuals.com
https://appuals.com/how-to-fix-pulseaudio-issues-in-linux/
Restarting the pulseaudio Service Without Logging Out Open a terminal window by holding down CTRL , ALT and T or select it from the application or Dash menu appropriate for the type of graphical user interface you’re using.
linux - How to restart Alsa/PulseAudio after using Jack ...
https://unix.stackexchange.com/questions/92679/how-to-restart-alsa-pulseaudio-after-using-jack
Output of service alsa-utils restart: Redirecting to /bin/systemctl restart alsa-utils.service Failed to issue method call: Unit alsa-utils.service failed to load: No such file or directory. See system logs and 'systemctl status alsa-utils.service' for details. And systemctl status alsa-utils.service:
PulseAudio on Linux
https://learn.foundry.com/nuke/content/timeline_environment/managetimelines/audio_pulse.html
Restarting PulseAudio. To start the PulseAudio daemon, do the following: 1. Open the ~/.pulse/client.conf file to enable PulseAudio for the current user, OR. Open the /etc/pulse/client.conf file to enable PulseAudio for all users. 2.
Pulseaudio sound server configuration · GitHub
https://gist.github.com/morgoth/1468756
# Restart pulseaudio: sudo /etc/init.d/pulseaudio restart # Now you should be able to run from your local machine i.e. PULSE_SERVER=192.168.1.101 mplayer some-movie.avi # where 192.168.1.101 is IP of your sound server # If something doesn't work, try restarting server ;-)
PulseAudio/Examples - ArchWiki
https://wiki.archlinux.org/title/PulseAudio/Examples
To route a particular client's output to it, find the client under the "Playback" tab, then change the client from its current sink (e.g. "Built-in Audio Analog Stereo") to "RTP". To use the RTP sink by default for all clients, add this to /etc/pulse/default.pa, then restart the local pulseaudio server: set-default-sink rtp ALSA monitor source
LEDE/OpenWRT — Setting Up A PulseAudio Sound Server …
https://medium.com/openwrt-iot/openwrt-setting-up-a-pulseaudio-sound-server-d138cffc0883
Next, we need to restart PulseAudio to ensure that the updated config is loaded, so run the following command. /etc/init.d/pulseaudio …
PulseAudio as a Server · GitHub
https://gist.github.com/Earnestly/4acc782087c0a9d9db58
[Unit] Description =Sound Server [Service] User =pulseaudio ExecStart =/usr/bin/pulseaudio Restart =on-failure [Install] WantedBy =sound.target runit #! /bin/sh exec chpst -u pulseaudio pulseaudio 2>&1
Using PulseAudio as network sound server on Ubuntu and ...
https://www.techytalk.info/pulseaudio-network-sound-server/
Using your PC as PulseAudio network client. Now you can open sound options on your client PC by pressing Alt+F2 and entering "gnome-volume-control" into the "Run Application" dialog. On the "Output" tab you should be able to select any of the devices on your server PC as well as any local sound device as output device.
Now you know Restarting Pulseaudio Server
Now that you know Restarting Pulseaudio Server, we suggest that you familiarize yourself with information on similar questions.
