Rem Connection Car Audio | Audio-Digital.net

We have collected the most relevant information on Rem Connection Car Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.

Installing a Car Audio Capacitor with REM Terminal - …

https://www.youtube.com/watch?v=vnIrLqu6z5g

Purchased yet another generic Chinese-made product this time a necessary upgrade to mobile audio system. The device is labeled as Boschmann 2.0 Farad car au...

REM Connection Question. - ecoustics.com

https://www.ecoustics.com/electronics/forum/car-audio/199879.html

Thanks in advance! the amp rem wire should not be hooked up to the antenna wire. if it is hooked to the power antenna wire, the amp will only turn on when you turn the HU to Radio, if you try a CD or AUX source, the amp will turn off. if the HU doesn't have a REM output lead on the back, you will have to hook the amp REM to the battery and use a switch to turn it off when …

wiring for two REM out | Car Audio Forum | CarAudio.com

https://www.caraudio.com/threads/wiring-for-two-rem-out.15936/

This was my post number 1....still unanswered.... hooking two amp remote wires to a relay and also control the DSP with the hu REm out... Team Caraudio. Sony C90, 210 EQ. Seas 27TDF/C, RE XXX 6.5, custom xo (dyn 240GT sitting idle) RF 60.2 amp. eD A15.22.

Remote Turn On Wire: What it is and How to ... - MTX Audio

https://www.mtx.com/library-remote-turn-on

Simply connect another piece of blue primary wire to the blue wire in the wiring harness and run the primary wire back to the amplifier to terminate in the remote turn on terminal. To connect wire to wire, an appropriately sized butt connector or other style connector can be used.

What is rem? - ecoustics.com

https://www.ecoustics.com/electronics/forum/car-audio/103936.html

So, rem, is the power button. You need to either go to you Head Unit (deck) and splice the wire into the remote trigger or go to your fuse box and use the IGN or ACC fuse. Just kind of push the wire or splice it in with the small fuse. The remote wire only needs to be about 20 gauge wire, it only carries about 4 volts.

Now you know Rem Connection Car Audio