Relays For Audio Switching | Audio-Digital.net

We have collected the most relevant information on Relays For Audio Switching. Open the URLs, which are collected below, and you will find all the info you are interested in.

How to choose a relay for audio switching? - …

https://gearspace.com/board/geekzone/655766-how-choose-relay-audio-switching.html

Also remember that when a relay is rated for say 24V it will work within a range between 17V and 36V (specs may differ). So when you've a +/-18v PSU you may be able to power both audio and relays from it. Unless you're building a complicated device like a mixer or so, I think a separate PSU for relays is overkill.

good relay for audio switch? | AVS Forum

https://www.avsforum.com/threads/good-relay-for-audio-switch.779442/

Here is a nice one available from Digikey The Hamlin HE722A1210 is a 12V double pole single throw reed relay that fits in a DIP socket, so you will need three per input component. At $3.28 each it's not bad. Click to expand...

Audio Switching Relay Recommendations | diyAudio

https://www.diyaudio.com/community/threads/audio-switching-relay-recommendations.348883/

Topic Overview concerning Audio-Relay Versions There are several threads here on diyaudio.com with topics like e. g. Best sounding signal level relay- Audio Grade Relay- Best Relays for signal path - Looking for the best relay-Audio Switching Relay Recommendations - go to

Using relays for audio signal switching? | DiyMobileAudio ...

https://www.diymobileaudio.com/threads/using-relays-for-audio-signal-switching.435329/

I need to switch stereo audio input (i.e. Ipod/Iphone level signal) from source "A" to another "B". The vehicle switch is effectively an SPST. So, to switch the two channels, I need to use one DPDT or two SPDT relays to swap the two channels. It would be a mechanically robust mobile solution...

Relay switching for audio - Electrical Engineering Stack ...

https://electronics.stackexchange.com/questions/102382/relay-switching-for-audio

A relay in an audio path is going to cause a "pop" under two conditions: If there's a voltage across it at the moment it closes. If there's a current flowing through it at the moment it opens. There's no way around this; if you can't avoid these conditions, then a relay may not be the correct solution for your application. Share

Now you know Relays For Audio Switching