We have collected the most relevant information on Quantar Discriminator Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.


QTI - FAST ComTec Amplifiers and Discriminators ... - Quantar

    http://www.quantar.com/pages/FAST/amps.htm
    The pulse-shape discriminator - Model 2160A - can be used to separate neutron and gamma particles, alphas and protons, electrons and alphas etc depending on the detector used. See individual data sheets for more details and specific features, as well as for the NIM power requirements if applicable.

VOTER-Audio - AllStarLink Wiki

    https://wiki.allstarlink.org/wiki/VOTER-Audio
    To set the audio levels: Start with txctcsslevel in voter.conf set to 0. Set the txctcss and txtoctype options in voter.conf as necessary for your application. Send a 1kHz@3kHz on-channel, full-quieting, signal in to the repeater's receiver. Use Menu …

[email protected] | Motorola Quantar ...

    https://nw-digital-radio.groups.io/g/main/topic/motorola_quantar_digital/14478350?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,14478350
    Keep in mind that all the audio in a Quantar (even analog) is digitized, so you never get to see what would be raw, analog discriminator audio. As a comparison, I looked at the receive side of a CDM mobile radio which is known to work well with MMDVM DMR and found the phase delay was very consistent, unlike the Quantar receive.

Re: Motorola Quantar & digital modes

    https://nw-digital-radio.groups.io/g/main/message/1687
    Keep in mind that all the audio in a Quantar (even analog) is digitized, so you never get to see what would be raw, analog discriminator audio. As a comparison, I looked at the receive side of a CDM mobile radio which is known to work well with MMDVM DMR and found the phase delay was very consistent, unlike the Quantar receive.

Motorola QUANTAR Compact Micro Controller – …

    https://northcommtechnologies.com/products/quantar-external-control-module
    The QUANTAR ECM is unique. Our design allows the repeated audio to remain entirely within the repeater. Unlike other controllers that route the audio outside of the cabinet, our design leaves the audio alone. Since we do not interfere with the repeat audio path, the QUANTAR ECM will not affect the repeater's alignment settings.

Discriminator output - The RadioReference Wiki

    https://wiki.radioreference.com/index.php/Discriminator_output
    The Discriminator output from a scanner is the raw, unfiltered signal that a scanner produces before it is sent to the audio stage for output through the speaker -- also called the "baseband audio." This discriminator source is required for applications such as Trunker, T4Win, UniTrunker, and DSD.

Now you know Quantar Discriminator Audio

Now that you know Quantar Discriminator Audio, we suggest that you familiarize yourself with information on similar questions.