We have collected the most relevant information on Pulseaudio Pipe Output To Input. Open the URLs, which are collected below, and you will find all the info you are interested in.


linux - Pipe/Mix Line In to Output in PulseAudio - Unix ...

    https://unix.stackexchange.com/questions/263274/pipe-mix-line-in-to-output-in-pulseaudio
    Configure the devices in pavucontrol. In pavucontrol, in the Recording tab, set the "Loopback" device's from input device to the device which receives the line in signal. In the Playback tab, set the "Loopback" device's on output device to the device through which you want to hear the line in signal. 3. Troubleshooting.

linux - How to redirect from Audio Output to Mic Input ...

    https://stackoverflow.com/questions/4719160/how-to-redirect-from-audio-output-to-mic-input-using-pulseaudio
    Asked about this on Freenode #pulseaudio and a helpful guy said "It can pretty much be done via pactl or pacmd, the commands you want are move-sink-input and move-source-output, but you need to know device and stream indexes." So It looks like pavucontrol is just a GUI, pactl and pacmd are the real deal, and most importantly, they're CLI apps.

alsa - how to pipe audio output to mic input - Unix ...

    https://unix.stackexchange.com/questions/82259/how-to-pipe-audio-output-to-mic-input
    General Steps. Run the application pavucontrol. Go to the "Input Devices" tab, and select "Show: Monitors" from the bottom of the window. If your computer is currently playing audio, you should see a bar showing the volume of the output:

PulseAudio/Examples - ArchWiki

    https://wiki.archlinux.org/title/PulseAudio/Examples
    $ pactl load-module module-loopback source=input_source sink=output_source. This command will print the module's ID so that you can stop the piping later like this: $ pactl unload-module id. If you lose the ID, you can obtain it from pactl list modules short. PulseAudio as a minimal unintrusive dumb pipe to ALSA

pulseaudio - How to Pass/Record audio output as an …

    https://askubuntu.com/questions/171287/how-to-pass-record-audio-output-as-an-input-device
    The term I used to find the solution was "record internal audio" rather than output/input keywords. To sum it up: Install pavucontrol (PulseAudio Volume Control) using apt-get or the Ubuntu Software Center. Open PulseAudio Volume Control. It should be in the applications menu under Sound and Video. Open Sound Recorder and start recording.

Routing mic to audio output for monitoring (ALSA + …

    https://gist.github.com/ericbolo/1261438048147b97316ff65f1ee105c6
    Edit the names of input and output to the appropriate source and sink and run the command: pacat -r --latency-msec=1 -d alsa_input.usb-0d8c_C-Media_USB_Headphone_Set-00-Set.analog-mono | pacat -p --latency-msec=1 -d alsa_output.usb-0d8c_C-Media_USB_Headphone_Set-00-Set.analog-stereo

PulseAudio: Redirecting audio file to input : archlinux

    https://www.reddit.com/r/archlinux/comments/rlpaj9/pulseaudio_redirecting_audio_file_to_input/
    9: Create an "output" that I'll play sound files on. 10: Create an "input" that will be my microphone + soundboard. 12: Connect my soundboard to my speakers. 13: Connect my soundboard to my input from 10. 14: Connect my mic to my input from 10. 15-16: Set different volumes for each input. 17: Make my input source be this new input from 10.

[ubuntu] How does module-pipe-sink in PulseAudio work ...

    https://ubuntuforums.org/archive/index.php/t-1197536.html
    I want to pipe the output from an application to a fifo, so that I could later on use this fifo as an input to ffmpeg. I have started the PulseAudio qith the default configuration, this is #!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it

Modules – PulseAudio

    https://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/Modules/
    PulseAudio can stream audio data to products that support the RAOP protocol. module-raop-discover. mDNS/DNS-SD Service Discovery of RAOP devices. module-raop-sink. The main module used to create a virtual output device which pipes all audio to the RAOP device. sink_name The name of the sink (see Modules) server The server to connect to

How can I pipe the output of sox to a specific (dummy ...

    https://www.reddit.com/r/archlinux/comments/2483pa/how_can_i_pipe_the_output_of_sox_to_a_specific/
    The defaults are 4*25 = 100 ms, which can be somewhat significant as it's both for input and output. There are plenty of other ways to do it, but I think it's most beneficial to fix the thing at its core instead of trying to do workarounds.

Now you know Pulseaudio Pipe Output To Input

Now that you know Pulseaudio Pipe Output To Input, we suggest that you familiarize yourself with information on similar questions.