We have collected the most relevant information on Pulseaudio Analog Loopback. Open the URLs, which are collected below, and you will find all the info you are interested in.
How to Loopback Application Sound as an Input Source with ...
https://huma.id/blog/pulseaudio-loopback/
How to Loopback Application Sound as an Input Source with PulseAudio. May 3, 2021 · 2 min read. This guide will show you how to loopback your computer’s application sound as a source in your meeting or calling software. There is probably a way to automate or make this setup permanent, which is something I’d like to later figure out.
PulseAudio/Examples - ArchWiki
https://wiki.archlinux.org/title/PulseAudio/Examples
5 Independent analog and digital outputs on the same card; 6 Simultaneous HDMI and analog output. 6.1 Alternative solution using module-loopback with delay compensation; 7 HDMI output configuration. 7.1 Finding HDMI output; 7.2 Testing for the correct card; 7.3 Manually configuring PulseAudio to detect the Nvidia HDMI; 7.4 Automatically switch ...
PulseAudio Loopback - Home Assistant
https://www.home-assistant.io/integrations/pulseaudio_loopback/
PulseAudio Loopback The goal behind this switch is to allow a very flexible whole home audio system based upon PulseAudio . For example, for a system with a 7.1 surround sound card, and 3 instances of MPD running, it is possible to quickly route the output of any MPD instance to any of the 8 possible (4 stereo) channels on the sound card, by ...
How to route pulse audio device into alsa loopback ...
https://askubuntu.com/questions/895216/how-to-route-pulse-audio-device-into-alsa-loopback-virtual-microphone
So this means the capturing of this audio stream has to be done via /dev/snd/pcmC2D1c; if you select loopback as the input device for flash, it will use /dev/snd/pcmC2D0c instead ( plugin-co means the plugin container flash is running in): user@desk:~$ lsof | grep /dev/snd/pcmC2 pulseaudi 3314 user mem CHR 116,13 556 /dev/snd/pcmC2D0p pulseaudi ...
audio - Pulseaudio module-loopback problems - Unix & Linux ...
https://unix.stackexchange.com/questions/312833/pulseaudio-module-loopback-problems
I've found information, that to play sound from input device I need to load loopback pulseaudio module and I did so: pactl load-module module-loopback source="bluez_source.2C_FF_EE_2D_22_51" sink="alsa_output.platform-sunxi-codec.analog-stereo". Such command creates two loopbacks, one in playback and one in recording.
Some pulseaudio config is missing · Issue #2 · …
https://github.com/jakemoroni/audio_async_loopback/issues/2
D: [alsa-sink-CA0132 Analog] protocol-native.c: Implicit underrun of 'Audio Async Loopback' D: [alsa-sink-CA0132 Analog] sink.c: alsa_output.pci-0000_04_00.0.analog-stereo: Found underrun 1268 bytes ago (1268 bytes ahead in playback buffer) D: [alsa-sink-CA0132 Analog] sink.c: alsa_output.pci-0000_04_00.0.analog-stereo: Found underrun 1268 ...
Now you know Pulseaudio Analog Loopback
Now that you know Pulseaudio Analog Loopback, we suggest that you familiarize yourself with information on similar questions.
