We have collected the most relevant information on Pjsip No Audio Devices Are Found. Open the URLs, which are collected below, and you will find all the info you are interested in.
No audio devices are found · Issue #2521 · pjsip/pjproject ...
https://github.com/pjsip/pjproject/issues/2521
List of detected audio devices. Logs/Screenshots Fail Audio Device Detection.txt. Desktop/Smartphone (please complete the following information): OS, Distribution & Version: Raspberry pi OS Buster distribution 4.19.118+ PJSIP version: 2.10; Device: Raspberry Pi Zero; Additional context. Both aplay –l and arecord –l showing available audio device
How to get the audio stream from PJSIP when there is no ...
https://stackoverflow.com/questions/46243029/how-to-get-the-audio-stream-from-pjsip-when-there-is-no-audio-hardware-device
The code generates this same error on Linux (Ubuntu 14) and Windows 10 when there are no hardware audio devices present. If there is an hardware audio device driver installed the exact same code works fine on both OSes. I have compiled the PJSIP libraries with PJMEDIA_AUDIO_DEV_HAS_NULL_AUDIO enabled.
no audio devices found — PJ SIP
https://www.spinics.net/lists/pjsip/msg20731.html
When I run the pjsystest program, it doesn’t find any installed audio devices. I have an audio board that I added to the raspberry pi that I had to set up the board, but now it is the default audio devices and other programs (vlc, Qmmp) see, and can use the audio just fine. It is using asla. I don’t see any place to change the audio device if it can’t find it. I’m not sure what …
Distro and PJSIP: No Audio - FreePBX Community Forums
https://community.freepbx.org/t/distro-and-pjsip-no-audio/52675
The PJSIP port is for signaling, the RTP ports (which you aren’t changing) are for audio. If you were unable to register then sure, the PJSIP port didn’t work. But you’ve both said you made calls and there was no audio. Therefore PJSIP signaling port is working. Considering PJSIP’s default is 5060, some providers block this port.
[SOLVED i.e. the problem never existed...] PJSIP with no ...
https://community.asterisk.org/t/solved-i-e-the-problem-never-existed-pjsip-with-no-audio-on-out-and-incoming-calls/78546
Hi! I started to use pjsip to connect to a SIP trunk (German Telekom). Internal calls are no problem. In- and outgoing signalling is also no problem, but there is no audio with these calls. The trunk is a bit special as it uses tcp for SIP, a proxy, and requires NAPTR and SRC to work for the name resolutions. My PBX is a bit special as it is sitting on the router and it sees the …
Asterisk PJSIP Troubleshooting Guide - Asterisk Project ...
https://wiki.asterisk.org/wiki/display/AST/Asterisk+PJSIP+Troubleshooting+Guide
Run the CLI command pjsip show aor <aor name>. If no AoR is displayed, then that means the AoR was not loaded. Ensure that the configuration section has type = aor specified. Ensure that all configuration options specified on the AoR are options that Asterisk recognizes. Ensure that the res_pjsip_registrar.so module is
No Audio Input or Output Devices found - Microsoft Community
https://answers.microsoft.com/en-us/windows/forum/all/no-audio-input-or-output-devices-found/53bcd0eb-dcea-48fe-b235-986ede92740a
No Audio Input or Output Devices found. After latest windows 10 update no audio devices are listed/. Looking in device manager - the audio devices all say working OK. But on bar at bottem of screen get speaker with red cross -- Playing audio - Audio trouble shouter cannot find any problems .. Sound settings say - No output or Input devices ...
Audio Device API Reference (2.10) - pjsip.org
https://www.pjsip.org/pjmedia/docs/html/group__s2__audio__device__reference.htm
The audio device supports setting echo cancellation fail length. The value of this capability is an unsigned integer representing the echo tail in milliseconds. The audio device has voice activity detection feature. The value of this capability is a pj_bool_t …
./configure with --disable-sound argument does not ... - PJSIP
https://trac.pjsip.org/repos/ticket/853
Resolution set to fixed; Status changed from new to closed; Fixed in r2740:. when --disable-sound is specified, no sound factory will be created
Now you know Pjsip No Audio Devices Are Found
Now that you know Pjsip No Audio Devices Are Found, we suggest that you familiarize yourself with information on similar questions.
