We have collected the most relevant information on Pcl86 Audion. Open the URLs, which are collected below, and you will find all the info you are interested in.
PCL86 - Worth a try? | diyAudio
https://www.diyaudio.com/community/threads/pcl86-worth-a-try.247727/
PCL86 - Worth a try? These are essentially an ECL86 with a 13/14volt heater. The data sheet for the PCL86 goes to great lengths to disguise the fact that this tube is an ECL86 and can be used for audio. All the measurement points are adjusted slightly and all the detail about audio use is omitted.
A Simple Single Ended PCL86 Stereo Audio Amplifier | …
https://www.dl8nci.de/en/pcl86_amplifier_100
PCL86 @ The Valve Museum
http://www.r-type.org/exhib/aaa1605.htm
The PCL86 was designed for the audio stage of a television receiver and offered a quality output. In 1961 Mullard developed a combination of an ECC83 triode and an EL84 output pentode in a single envelope and this was the ECL86.The PCL86 was the series heater chain version of that work, here made by Tungsram.
14GW8 / PCL86 Audio Tubes - www.thetubestore.com
https://www.thetubestore.com/14gw8-pcl86
14GW8 / PCL86. Replaces 14GW8 and PCL86 tube types. Assorted brands in stock. What does "NOS" mean, anyway?: Commonly known as "NOS," the term New Old Stock simply refers to tubes that were made years ago but have never been used. Much like antiques, "NOS" tubes are currently not being manufactured and this means their supply is dwindling while ...
Einkreiser-Audion mit einer PCL86 an einer …
https://www.youtube.com/watch?v=Y0sBi_eFdzY
PCL86 Single-Ended Amplifier
https://livinginthepast-audioweb.co.uk/index.php?p=pcl86seamp
PCL86 Single-Ended Amplifier. Film & TV: Four-Mations. Valve Amplifiers: NEW - Chinese Spud Amp. NEW - EL84 Push-Pull Amp. NEW - PCL86 Single-Ended Amp. The Real Williamson Amp. Other EL84 Power Amplifiers.
PCL86 vs ECL86 - Super Best Audio Friends
https://www.superbestaudiofriends.org/index.php?threads/pcl86-vs-ecl86-thoughts-and-comparisons.8753/
I just built a elekit TU-8100 with its included PCL86 tubes. SOunds pretty good with my Martinlogan LX16 speakers, so I was wonder hw it would sounds with headphones. I made a banana plugs to 4-pin XLR adapter and gave it shot. The amp is rather bass anemic with headphones. Might be the tubes need to burn in. Might be the PCL86 tubes in general.
Audion mit PCL86 auf 49m und 3 m Antennendraht - …
https://www.youtube.com/watch?v=w2QISgGsD2g
The Best Stereo Valve Amp In The World | Hackaday
https://hackaday.com/2017/08/16/the-best-stereo-valve-amp-in-the-world/
Now you know Pcl86 Audion
Now that you know Pcl86 Audion, we suggest that you familiarize yourself with information on similar questions.
