We have collected the most relevant information on Pac Audio Swi-Ps. Open the URLs, which are collected below, and you will find all the info you are interested in.


Steering Wheel Control Interface Wiring – PAC

    https://pac-audio.com/swi-guide-center/
    PAC is a brand of AAMP Global. For warranty information, view our PAC Warranty page. AAMP Global. PAC Audio. Stinger Electronics. iSimple. Phoenix Gold. EchoMaster. Autoleads.

Amazon.com: PAC SWI-PS Steering Wheel Control …

    https://www.amazon.com/PAC-SWI-PS-Interface-Discontinued-Manufacturer/dp/B001EAWNVY
    PAC's SWI-PS interface allows you to use the steering wheel controls in a wide variety of vehicles to command your new Pioneer or Sony radio. Installation is straightforward -connect a few wires, then program the adapter for your particular car and your stereo, and you'll retain the convenience of your steering wheel controls.

Universal Steering Wheel Control Interface ... - pac-audio.com

    https://pac-audio.com/content/uploads/sites/6/swi-ps_instructions-2.pdf
    SWI-PS SWI-PS SWI-PS SWI-PS If you programmed the interface for version #4, proceed with the following steps. If you did not program the interface for version #4, skip to Step 18. Step 12. Press and hold programming/ mode button on SWI-PS. Step 14. Press and hold the TEMP UP button on the steering wheel control. LED will turn off. LED will ...

PAC SWI-PS Steering wheel control interface for Dual ...

    https://www.crutchfield.com/ISEO-rmsbcspd/p_127SWIPS/PAC-SWI-PS.html
    PAC's SWI-PS interface allows you to use the steering wheel controls in a wide variety of vehicles to command your new Pioneer or Sony radio. KEEP READING What's in the box: PAC SWI-PS owner's manual Steering wheel radio control interface with attached 34" cable (with 3.5mm miniplug) 24" Wiring harness

Universal Steering Wheel Control Interface ... - pac-audio.com

    https://pac-audio.com/content/uploads/sites/6/swi-ps_instructions.pdf
    SWI-PS SWI-PS SWI-PS SWI-PS If you programmed the interface for version #4, proceed with the following steps. If you did not program the interface for version #4, skip to Step 8. Step 12. Press and hold programming/ mode button on SWI-PS. Step 14. Press and hold the TEMP UP button on the steering wheel control. LED will turn off. LED will light ...

Now you know Pac Audio Swi-Ps

Now that you know Pac Audio Swi-Ps, we suggest that you familiarize yourself with information on similar questions.