Pac Audio C2r-Chy4 Harness

Radio Replacement Interface With Navigation Outputs for ...

https://catalog.pac-audio.com/catalog/radio-replacement/c2r-chy4

Radio Replacement Interface With Navigation Outputs for Select Chrysler, Dodge, Jeep Vehicles. $169.00 C2R-CHY4.

Amazon.com: PAC C2R-CHY4 Radio Replacement …

https://www.amazon.com/PAC-C2R-CHY4-Replacement-Interface-Chrysler/dp/B001U3ULQO

PAC C2R-CHY4 (c2rchy4) Radio Replacement Interface for ...

https://www.sonicelectronix.com/item-18010-PAC-C2R-CHY4.html

The PAC C2R-CHY4 allows for the installation of an aftermarket radio in 2005-2009 Chrysler, Jeep, and Dodge vehicles utilizing the CAN Bus data …

C2R-CHY4 - Car Audio Stereo - Car Subwoofers

https://www.sonicelectronix.com/pdf/pac/pac-c2rchy4.pdf

or Without Premium Audio Systems C2R-CHY4 Installation Notes: 1. Only one of the two provided radio harnesses will be used. Remove the factory installed radio to determine the correct harness for your particular vehicle. 2. Vehicles without a factory amplifi er: Connect the aftermarket radio’s front and rear speaker wires to the 22 pin plug. 3.

C2R-CHY4 - Abt Electronics

https://content.abt.com/documents/39905/C2RCHY4_manual.pdf

PAC C2R-CHY4 Wiring Interface Connect a new car …

https://www.crutchfield.com/ISEO-rmsbcspd/p_127C2RCHY4/PAC-C2R-CHY4-Wiring-Interface.html

Need help with pac c2r-chy4 harness. - Electrical-battery ...

https://www.stevemeadedesigns.com/board/topic/191997-need-help-with-pac-c2r-chy4-harness/

The kit originally came with 2 harnesses to choose from which plugs into the factory harness. The harness that was used will not work for my 200 so I purchased the correct one. Now that I have the right harness, I'm not sure how to wire it into the pac c2r-chy4 harness and swi can interface.

Quick couple PAC C2R-CHY4 Wiring Harness Questions ...

https://www.lxforums.com/board/automotive-electronics-audio-and-video-/300937-quick-couple-pac-c2r-chy4-wiring-harness-questions-updated-questions.html

Quick couple PAC C2R-CHY4 Wiring Harness Questions (Updated with new questions) *update* I installed the stereo as described below and everything works but the radio. It does not receive any stations. I called Crutchfield and they suggested that I wire both the solid blue wire and the striped blue wire from the PAC kit to the striped blue "Amp ...