We have collected the most relevant information on Options Snd Usb Audio Index 1. Open the URLs, which are collected below, and you will find all the info you are interested in.


ALSA - Debian Wiki

    https://wiki.debian.org/ALSA#:~:text=Force%20the%20cards%20to%20load%20in%20a%20different,and%20the%20USB%20microphone%20to%20be%20card%201.
    none

How to Assign USB Audio as primary sound device in …

    https://www.crunchbang.org/forums/viewtopic.php?id=9852
    # Assign USB Audio as default sound card options snd_usb_audio index=-1. Delete these last TWO lines in the file: # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2. New file should look like this:

USB card as my default Audio Device - Raspberry Pi Stack ...

    https://raspberrypi.stackexchange.com/questions/19705/usb-card-as-my-default-audio-device
    The correct way to do it is to add options snd-usb-audio index=0 followed by options snd_bcm2835 index=1. Essentially what doing this is forcing the default sound module ( snd_bcm2835) to be disabled while the usb sound module ( snd-usb-audio) is enabled.

UbuntuStudio/UsbAudioDevices - Community Help Wiki

    https://help.ubuntu.com/community/UbuntuStudio/UsbAudioDevices
    To give the internal microphone the device number hw:1, we enter the line . options snd-usb-audio index=1 vid=0x046d pid=0x08c6. Still with me? OK! To configure multiple cards, I had to enter them on the same line, like this:

Updating ALSA Config | USB Audio Cards with a …

    https://learn.adafruit.com/usb-audio-cards-with-a-raspberry-pi/updating-alsa-config
    options snd-usb-audio index=0. Note we removed the # at the start of the line. For the latest Raspbian Wheezy versions, look for this line instead: options snd-usb-audio index=-2. There's no # to remove in this case, just change the index from …

raspbian - Audio and microphone configuration of usb sound ...

    https://raspberrypi.stackexchange.com/questions/28158/audio-and-microphone-configuration-of-usb-sound-card-on-r-pi
    If you have already gone into /etc/modprobe.d/alsa-base.conf and changed options snd-usb-audio index=-2 to options snd-usb-audio index=0 then: First: sudo nano ~/.asoundrc. Second: Add . pcm.!default { type hw card 0 } ctl.!default { type hw card 0 …

Matrix:Module-usb-audio - AlsaProject

    https://www.alsa-project.org/wiki/Matrix:Module-usb-audio
    # ALSA portion alias char-major-116 snd alias snd-card-0 snd-usb-audio # module options should go here # OSS/Free portion alias char-major-14 soundcore alias sound-slot-0 snd-card-0 # card #1 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 …

Using a USB Audio Device With a Raspberry Pi

    https://computers.tutsplus.com/articles/using-a-usb-audio-device-with-a-raspberry-pi--mac-55876
    # options snd-usb-audio index=-2 Simply commenting out the line will allow the USB audio device to be the primary method of output. Step 5. Press Ctrl Z and save the changes, then restart your Raspberry Pi by entering: $ sudo reboot Step 6. With the Raspberry Pi restarted, re-run the following command: $ amixer

CMUSphinx Open Source Speech Recognition

    https://cmusphinx.github.io/wiki/raspberrypi/
    To options snd-usb-audio index=0. if there is some other options snd-usb-audio index=1, comment it out. sudo reboot cat /proc/asound/cards check your device is at 0 sudo apt-get install bison sudo apt-get install libasound2-dev. download sphinxbase latest , extract. ./configure --enable-fixed make sudo make install.

USB-AUDIO adapter microphone port on Raspberry Pi - …

    https://support.plugable.com/t/usb-audio-adapter-microphone-port-on-raspberry-pi/6887
    options snd-pcsp index=-2. Keep snd-usb-audio from beeing loaded as first soundcard. #options snd-usb-audio index=-2 options snd-usb-audio index=0 options snd_bcm2835 index=1. Prevent abnormal drivers from grabbing index 0. options bt87x index=-2 options cx88_alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2

Now you know Options Snd Usb Audio Index 1

Now that you know Options Snd Usb Audio Index 1, we suggest that you familiarize yourself with information on similar questions.