We have collected the most relevant information on Openwrt Audio Out. Open the URLs, which are collected below, and you will find all the info you are interested in.


[OpenWrt Wiki] USB audio support

    https://openwrt.org/docs/guide-user/hardware/audio/usb.audio#:~:text=As%20long%20as%20you%20have%20the%20necessary%20hardware,structure%20OpenWrt%20does%20not%20come%20with%20audio%20support.
    none

[OpenWrt Wiki] PulseAudio

    https://openwrt.org/docs/guide-user/hardware/audio/pulseaudio
    audio_output {type "pulse" name "openWRT Network Sink" server "openWRT:4000" format "48000:16:2"} For console applications you can simply set the PULSE_SERVER environment variable: export PULSE_SERVER = 'openWRT:4000'

[OpenWrt Wiki] USB audio support

    https://openwrt.org/docs/guide-user/hardware/audio/usb.audio
    Utilize a USB sound card with GNU/Linux support, see the Notes on that. You must have enabled the ALSA support in the kernel. Follow usb-installing and install the packages kmod-usb-audio and kmod-sound-core for Kernel audio support and ALSA drivers. Plug the USB sound card of your choice into the USB port of your OpenWrt router.

[OpenWrt Wiki] Bluetooth in OpenWrt

    https://openwrt.org/docs/guide-user/hardware/bluetooth/start
    Bluetooth in OpenWrt Bluetooth Audio * OpenWrt with audio adapter + speakers as audio sink for a bluetooth source (mobile) see bluetooth.audio * OpenWrt as audio source for bluetooth speakers: see bluetooth.speakers Tethering * OpenWrt offers Internet via bluetooth (not needed ? 2.4G Internet should be faster/ has better signal)

LEDE/OpenWRT — Setting Up A PulseAudio Sound Server …

    https://medium.com/openwrt-iot/openwrt-setting-up-a-pulseaudio-sound-server-d138cffc0883
    SSH to your LEDE/OpenWRT device. If you are using Windows then start PuTTY and click Session on the left side, select SSH from the options, and then enter in the IP Address of your LEDE/OpenWRT ...

LEDE/OpenWRT — Setting Up A USB Audio Device | by CT …

    https://medium.com/openwrt-iot/openwrt-setting-up-a-usb-audio-device-907486e5eb56
    This guide will help you get your LEDE/OpenWRT device supporting USB Audio. This can then be used for cool tasks such as setting up sound servers. If you are using Windows then start PuTTY and ...

Sound card in OpenWrt | Hardware solutions for OpenWrt

    http://h-wrt.com/en/doc/sound
    Sound card in OpenWrt. Now when you have the possibility to install more packages from local repository, all the new packages on the configuration stage will be marked with <M>. They will be done as modules, which can be installed later at any moment. At the stage of configuration OpenWrt the following modules are to be selected: Kernel modules:

OpenWrt Forum Archive

    https://forum.archive.openwrt.org/viewtopic.php?id=72424
    1x Audio out (3.5 mm Stereo jack) (Realtek ALC5621, I2S Audio codec) Serial Console: Yes - 57600 8N1 (connector J2: 3.3V / RX / GND / TX ) JTAG: No. Well I'm somewhat stuck with the audio chip of that device. The codec chip uses i2s …

OpenWrt/Video_Out – Gateworks

    http://trac.gateworks.com/wiki/OpenWrt/Video_Out
    As of OpenWrt 16.02, we have introduced rudimentary support for display output. Display output for the i.MX IPU was only recently added to the Linux Kernel for HDMI and LVDS. Since our OpenWrt 16.02 BSP is on a newer 4.4.0 kernel, we were able to take advantage of this. Please see linux/display for details on configuring the output for OpenWrt .

Now you know Openwrt Audio Out

Now that you know Openwrt Audio Out, we suggest that you familiarize yourself with information on similar questions.