We have collected the most relevant information on Mythtv Audio Static. Open the URLs, which are collected below, and you will find all the info you are interested in.
Digital Audio Tutorial - MythTV Official Wiki
https://www.mythtv.org/wiki/Digital_Audio_Tutorial
If you hear digital noise or what sounds like static from an old sci-fi movie, it is the digital spdif data stream being sent to the analog part of your sound card. Check your output aplay -l output again for the digital device. MythTV 0.23 …
Configuring Digital Sound - MythTV Official Wiki
https://www.mythtv.org/wiki/Configuring_Digital_Sound
Digital sound is the preferred method to get audio from a MythTV installation for two reasons 1. We want to have the audio decoding done outside of the computer for greater sound quality. 2. We want to play DVD with full surround sound using DTS or Dolby Digital. You need to be aware that ALSA by default will upsample all of your audio to 48 kHz.
Audio Framework - MythTV Official Wiki
https://www.mythtv.org/wiki/Audio_Framework
This page mainly refer to mythtv 0.24 and later Using myth audio framework will greatly simplify your task should you want to work with sound. The audio framework will let your application/plugin work on any platforms and any supported hardware without even having the need for the developer to know what those are. ... Opening the audio: static ...
Configuring Digital Sound with AC3 and SPDIF - MythTV ...
https://www.mythtv.org/wiki/Configuring_Digital_Sound_with_AC3_and_SPDIF
Configure MythTV for Digital Sound. This part is the easy part. Fire up mythfrontend and navigate to: Utilities/Setup->Setup->General On Page 3, change the default audio device to "ALSA:default" and change the passthrough device to "ALSA:default". Check the box next to "AC3 to SPDIF passthrough".
MythTV, Open Source DVR
MythTV is a Free Open Source software digital video recorder (DVR) project distributed under the terms of the GNU GPL. It has been under heavy development since 2002, and now contains most features one would expect from a good DVR (and many new ones that …
Video pipeline - MythTV Official Wiki
https://www.mythtv.org/wiki/Video_pipeline
The video playback mechanism in MythTV uses a common path for all of the types: Recording playback. ... there is a new TV object created for it. A static method TV::StartTV calls static method TV::GetTV which creates the object. ... If audio and video are out of sync by more than a certain amount, AVSync adjust things by (1) dropping a frame ...
Bursts of white noise sound when playing videos - Ask …
https://askubuntu.com/questions/82109/bursts-of-white-noise-sound-when-playing-videos
Look at just use ALSA:Default as the MythTV audio-setting. You shouldnt need to kill the host pulse-audio - thus multicasting etc should still work. You may need to enable the MythTV software controls to change sound settings.
Distorted video when recording (but audio is fine) - MythTV
https://code.mythtv.org/trac/ticket/12986
I've marked this as Critical with a high severity because MythTV cannot record any watchable video (unless you just want the audio). Again it works correctly as of Oct 22, ...
User:Thedaver - MythTV Official Wiki
https://www.mythtv.org/wiki/User:Thedaver
Didn't do much with the surround sound, obviously, but that's part of the plan here. So the finished side of the basement will get the most investment in the project. I'm visualizing a 52" flat panel, a decent stereo to support home theater audio, 5.1 surround, and MythTV frontend. And, as I mentioned, I need to get the Wii game connected here.
Now you know Mythtv Audio Static
Now that you know Mythtv Audio Static, we suggest that you familiarize yourself with information on similar questions.
