We have collected the most relevant information on Multichannel 5.1 Analogue Audio Connection. Open the URLs, which are collected below, and you will find all the info you are interested in.
RCA Surround Sound Connections: Analog 5.1 Audio …
https://www.the-home-cinema-guide.com/rca-surround-sound.html
There are six RCA jacks for each of the 5.1 surround sound connections. Front left/right, center, surround left/right and subwoofer. On some devices, you may find more connections than this. This would be for speaker …
5.1 from Stereo RCA | AVForums
https://www.avforums.com/threads/5-1-from-stereo-rca.2392646/
The closest you'd get is matrixed 5.1, but this would need processing such as Dolby Pro Logic in order for the matrixed surround channels to be able to be acced from the 2 channel analogue source. You'd need 8 analogue cable from a saource thay has multichannel analoge output to be able to convey discrete 5.1 via analogue RCA cabling.
5.1 multichannel analog to hdmi converter? - AVS Forum
https://www.avsforum.com/threads/5-1-multichannel-analog-to-hdmi-converter.1343098/
Originally Posted by Ethan Winer /t/1343098/5-1-multichannel-analog-to-hdmi-converter#post_20611543 Here's the main issue: A device that converts discrete analog to HDMI digital will also have to encode the audio using either Dolby or DTS. Those boxes are available, but very expensive. Even software, which won't work in real time, is expensive.
How To Set up a Blu-ray Player Using Multi-Channel …
https://www.bigpicturebigsound.com/How_To_Set_up_a_Blu-ray_Player_Using_Multi-Channel_Analog_Outputs_And_Why.shtml
The player then sends the multiple analog audio outputs to your receiver over multi-channel analog audio cables. 2.) Choose Your Cables You'll need to run a separate analog audio cable from each speaker output on the player to the matching input on your receiver -- six cables for a 5.1 system, eight cables for 7.1.
Digital Optical Coax S/PDIF Audio To 5.1 Analog Surround ...
http://www.ambery.com/au-da115.html
5.1 Digital To Analog Surround Sound Decoding Multi-channel digital optical or coax S/PDIF audio in DD, AC3, DTS, PCM format can be decoded by this audio processor into analog 5.1 surround sound for working with existing amplifier and speakers to get different sound effects. Stereo To 5.1 Surround Sound Audio Processor
Multichannel Preamp - Are there even any left? - Home ...
https://community.klipsch.com/index.php?/topic/204226-multichannel-preamp-are-there-even-any-left/
You can support 5.1 (or 7.1) with enough traditional hi-fi amps (i.e., amps that have RCA line-level inputs). (The Oppos provide analog audio connections for up to 7.1.) On occasion I directly drive power amps from my Oppo units. (The Oppo’s set-up allows you to adjust the relative volume level of each channel.)
5.1 Analog to Digital Converter? | AVForums
https://www.avforums.com/threads/5-1-analog-to-digital-converter.1723476/
At least that's how I understood " convert 5.1 surround analog RCA connectors to a single HDMI or optical/coaxial digital cable." Apparently you have 5 (independent) audio sources ("But if I connect my 5 audio sources"), and I don't understood how you want them reproduced. If individually switched, you just need a switch.
Multi-channel SACD connection - Steve Hoffman Music Forums
https://forums.stevehoffman.tv/threads/multi-channel-sacd-connection.6315/
Or you could use the digital to analogue converter in the SACD player to output stereo Red Book audio and Stereo SACD to your receiver. You can't use the 5.1 multi-channel output of an SACD disk unless you have 5.1 analogue inputs on your receiver. Richard Feirstein, Aug 28, 2002 #8 stereo71 Forum Resident Location: texas
SACD: HDMI vs Analogue for 5.1 and 7.1 with Oppo BDP 105 ...
https://forums.audioholics.com/forums/threads/sacd-hdmi-vs-analogue-for-5-1-and-7-1-with-oppo-bdp-105-or-udp-205.108870/
The beauty of the Oppo205 is supposed be the new analog DACs, but they also upgraded the HDMI connection with an improved anti-jutter feature. With the 205, a little more airy than analog, but multi-channel SACDs sound pretty good via the hdmi connection too.
Which audio to use: Multichannel analogue or toslink ...
https://www.digitalhome.ca/threads/which-audio-to-use-multichannel-analogue-or-toslink-digital-coax.86866/
Also with the 5.1 analog connection, you will have to use the bass management of the HD/BD player (won't be able to use the AVR one for this connection). 1 - 9 of 9 Posts Recommended Reading AV Receiver help (BD Player & Other connections) A/V Receivers and Amplifiers 2 1K S SOUPNAZZI · updated Dec 15, 2008 setting up the audio from dvd to avr
Now you know Multichannel 5.1 Analogue Audio Connection
Now that you know Multichannel 5.1 Analogue Audio Connection, we suggest that you familiarize yourself with information on similar questions.
