We have collected the most relevant information on Mplayer Dvb Audio Channel. Open the URLs, which are collected below, and you will find all the info you are interested in.
MPlayer - LinuxTVWiki
https://www.linuxtv.org/wiki/index.php/MPlayer#:~:text=%24%20mplayer%20dvb%3A%2F%2F%20That%20command%20will%20result%20in,list%20by%20pressing%20h%20%28next%29%20on%20your%20keyboard.
MPlayer
https://mplayerhq.hu/DOCS/man/en/mplayer.1.html
Select audio channel (MPEG: 0-31, AVI/OGM: 1-99, ASF/RM: 0-127, VOB(AC-3): 128-159, VOB(LPCM): 160-191, MPEG-TS 17-8190). MPlayer prints the available audio IDs when run in verbose (-v) mode. When playing an MPEG-TS stream, MPlayer/MEncoder will use the first program (if present) with the chosen audio stream.-ausid (also see -alang)
3.9. Surround/Multichannel playback - MPlayer - The …
http://www.mplayerhq.hu/DOCS/HTML/en/advaudio-surround.html
mplayer dvd://1 -channels 6 -af hrtf. hrtf only works well with 5 or 6 channels. Also, hrtf requires 48 kHz audio. DVD audio is already 48 kHz, but if you have a file with a different sampling rate that you want to play using hrtf you must resample it: mplayer filename-channels 6 -af resample=48000,hrtf
MPlayer - LinuxTVWiki
https://www.linuxtv.org/wiki/index.php/MPlayer
mplayer -tv driver=v4l2:device=/dev/video0:norm=NTSC:chanlist=us-bcast:channel=10:alsa=1:adevice=hw.1:audiorate=48000:immediatemode=0:amode=1 tv://. In this case, it is assumed that the -alsa module created as the second audio adapter (hw:1), and supports an audio rate of 48 kHz.
[SOLVED]mplayer DVB-T with H264 streams ... - Arch Linux
https://bbs.archlinux.org/viewtopic.php?id=159744
-scanning the channels for mplayer in ~/.mplayer/channels.conf with scan utility, all fine-launching it with mplayer dvb://"TV3" for example The channels by the way also appear fine in umplayer's TV list, but the codec should be MPEG4 AVC (h264), I assume that mplayer thinks it's MPEG2. Here is what I get when starting mplayer with the command above:
MPlayer(1) manual page - SourceForge
http://tivo-mplayer.sourceforge.net/docs/mplayer-man.html
Select audio channel [MPEG: 0-31 AVI/:OGM: 1-99 ASF/:RM: 0-127 VOB(AC3): 128-159 VOB(LPCM): 160-191] MPlayer prints the available IDs when running in verbose (-v) mode. -alang <two letter country code> (also see -aid option) Works only for DVD playback.
How to Install FFmpeg , Mplayer , Mencoder , MP4Box ...
https://www.hivelocity.net/kb/how-to-install-ffmpeg-mplayer-mencoder-mp4box-flvtool2-and-all-their-libraries/
libmp3lame is an open source application used to encode audio into the MP3 file format. cd /usr/local/src wget https://downloads.sourceforge.net/project/lame/lame/3.98.4/lame-3.98.4.tar.gz tar zxvf lame-3.98.4.tar.gz cd lame-3.98.4 ./configure && make clean && make && make install Install gpac and MP4Box MP4Box is a MP4 multiplexer.
Product Introduction DVB-T/H
https://dl.cdn-anritsu.com/en-us/test-measurement/files/Product-Introductions/Product-Introduction/MS8911B_EL1100.pdf
Audio Data (DVB-T) MPEG2-TS (DVB-H) Physical layer analysis MPEG-TS Layer analysis MPE Layer analysis IP Layer analysis - Frequency Offset-Sgina Pl ower - Impulse Response - MER/Constellation - BER - PER - DVB-T 1st, 2nd, 3rd priority monitoring-FER-MFER-IP (TR101.290) RF Supported by MS8911B ASI Output Supported Functions DVB-T/H Physical ...
MPlayer - The Movie Player
https://lists.mplayerhq.hu/design7/news.html
MPlayer 1.2.1 is a bugfix release from the 1.2 branch. If you're using MPlayer 1.2 you are encouraged to upgrade. MPlayer 1.2.1 fixes many crashes with fuzzed files, squashes many bugs and includes some compatibility enhancements. A lot of bugs are fixed also in FFmpeg, you can check their changelog for details.
Testing your DVB device - LinuxTVWiki
https://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device
Method 1: First tune into a channel, as described above in the zapping step, and then next have dvbstream save a particular stream to file. For example: tzap 'BBC ONE' dvbstream 600 601 -o > bbc1.mpeg The values "600 and 601" are, respectively, the video and audio PIDs for the channel BBC ONE, as derived from the channels.conf file. So this is why it's important that you have …
Man page of MPlayer
http://olympus.het.brown.edu/cgi-bin/man/man2html?1+mplayer
Select audio channel (MPEG: 0-31, AVI/:OGM: 1-99, ASF/:RM: 0-127, VOB(AC3): 128-159, VOB(LPCM): 160-191, MPEG-TS 17-8190). MPlayer prints the available audio IDs when run in verbose (-v) mode. When playing an MPEG-TS stream, MPlayer/:MEncoder will use the first program (if present) with the chosen audio stream.
Now you know Mplayer Dvb Audio Channel
Now that you know Mplayer Dvb Audio Channel, we suggest that you familiarize yourself with information on similar questions.
