We have collected the most relevant information on Mpd Audio Output Device. Open the URLs, which are collected below, and you will find all the info you are interested in.
Configuration | Music Player Daemon Wiki | Fandom
https://mpd.fandom.com/wiki/Configuration
Since version 0.15 there is a built-in HTTP streaming deamon/server that comes with MPD. To activate this server simply set it as output device in mpd.conf: audio_output { type "httpd" name "My HTTP Stream" encoder "vorbis" # optional, vorbis or lame port "8000"
Alsa | Music Player Daemon Wiki | Fandom
https://mpd.fandom.com/wiki/Alsa
The device line in the audio_output below should be set to the device name for the mpd volume that was specified above in the asound.conf file. Note that the mixer_device line uses the same device as the device line in the audio_output section, but that the mixer_control line should be set to the NAME that was given in asound.conf .
MusicLounge: Configure MPD – Linux Audio Foundation
https://linuxaudiofoundation.org/musiclounge-configure-mpd/
audio_output { type "alsa" name "Hidizs S9 Pro Mixer ON" device "hw:0,0" mixer_type "hardware" mixer_control "PCM" mixer_index "0" dop "no" } # CTRL+O to save. # CTRL+X to exit. # that’s it! # Our recommendation is to avoid using volume control in MPD configuration if.
Assigning MPD audio output to jack and other applications ...
https://raspberrypi.stackexchange.com/questions/58822/assigning-mpd-audio-output-to-jack-and-other-applications-to-hdmi
the output for mpd is configured in /etc/mpd.conf as explained for example here. so without changing anything else in the system, the default output for other apps should be furthermore hdmi. further information about using multiple audio output can be found here .
User’s Manual — Music Player Daemon 0.24~git …
https://mpd.readthedocs.io/en/latest/user.html
Audio outputs are devices which actually play the audio chunks produced by MPD. You can configure any number of audio output devices, but there must be at least one. If none is configured, MPD attempts to auto-detect. Usually, this …
[Solved] MPD - Failed to open audio output / Multimedia ...
https://bbs.archlinux.org/viewtopic.php?id=175726
ene 17 21:00:55 ddich systemd[1]: Starting Music Player Daemon... ene 17 21:00:55 ddich systemd[1]: Started Music Player Daemon. ene 17 21:00:55 ddich mpd[14061]: output: No 'audio_output' defined in config file ene 17 21:00:55 ddich mpd[14061]: output: Attempt to detect audio output device ene 17 21:00:55 ddich mpd[14061]: output: Attempting to detect …
Music Player Daemon/Tips and tricks - ArchWiki - Arch …
https://wiki.archlinux.org/title/Music_Player_Daemon/Tips_and_tricks
mpdas is an AudioScrobbler client for MPD written in C++. It uses curl and libmpd. mpdas supports the latest AudioScrobbler protocol (2.0) and will also cache unscrobbled plays in ~/.mpdascache if there is no network connectivity. mpdas AUR is available in the AUR . Configuration of mpdas is very simple, see the official README.
sound - MPD with pulseaudio - Ask Ubuntu
https://askubuntu.com/questions/555103/mpd-with-pulseaudio
This requires the following in /etc/mpd.conf: audio_output { type "pulse" name "My PULSE Device" server "localhost" } Then we also need to load the TCP protocol to stream to a running PulseAudio server. This can be added to the /etc/pulse/default.pa to be loaded every time a user logs in (or started from CLI for testing with pacmd load-module ).
Now you know Mpd Audio Output Device
Now that you know Mpd Audio Output Device, we suggest that you familiarize yourself with information on similar questions.
