We have collected the most relevant information on Maximum Distance Unbalanced Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.
Audio/Video | Cable Distance Limits | ShowMeCables.com
https://www.showmecables.com/blog/post/cable-distance-limits-audio-video
2.5mm/3.5mm/¼” - 150 feet (regular); 250 feet (with extender, 3.5mm only) 2.5mm, 3.5mm (also called headphone cables), and ¼” audio cables have a maximum distance of 150’ on average. Off-the …
Balanced and Unbalanced audio signals - a guide
https://www.soundsfromthesuburbs.com/balanced-and-unbalanced-audio-signals-a-guide/
Unbalanced cables are great for connecting a guitar to an amp. However, because they are not very good at suppressing noise from outside interference, unbalanced cables should have a maximum length of 15-20 feet (4-6 meters), especially when used with signals that are low-level to begin with (such as microphones). Balanced Cables and Signals
Balanced vs. Unbalanced Audio Interconnections
http://www.hottconsultants.com/pdf_files/Audio%20Interconnections.pdf
the shield will be 62.5 uV. For consumer audio products the reference signal level is about 300 mV (-10 dBV). The signal to noise ratio will therefore be 74 dB. For a high quality consumer audio system we would probably like the S/N ratio to be greater than 100 dB. Therefore, we would most likely be able to hear some 60-Hertz hum in quiet
Recommended, or not, max length for RCA audio cables ...
https://www.avsforum.com/threads/recommended-or-not-max-length-for-rca-audio-cables.1394457/
Running an unbalanced cable more than ten feet is asking for trouble; all kinds of problems can occur with that kind of setup. You definitely don't want to run an unbalanced (RCA) cable 50 feet!! There are two solutions that will work. #1 is to get a piece of pro audio or high-end gear that has balanced outputs; very expensive.
Balanced vs. Unbalanced Cables - Audiosolace
https://audiosolace.com/balanced-vs-unbalanced-cables/
Balanced cables are responsible for transmitting the sound signal from one spot to another by delivering an unmatchable signal. This makes them efficient in stopping any noise coming from the outside and preserving the signal. As a result, balanced cables can support longer lines between 15- 30 meters.
Max length of IC's? Long IC's vs ... - Audiogon Marketplace
https://forum.audiogon.com/discussions/max-length-of-ic-s-long-ic-s-vs-short-sw
The likelihood that a long unbalanced interconnect will work well depends on the output impedance of the component driving the cable (the lower the better), and the capacitance per unit length of the particular cable (the lower the better, as Ths364 indicated).
Max Length for Line Level Cable? - Craig Vecchione's Live ...
https://www.harmonycentral.com/forums/topic/188159-max-length-for-line-level-cable/
Concerning the "sound quality" thing: Technically speaking: the longer the cable, the more audio degradation, especially concerning unbalanced hi-z... but there is such a thing as excellency vs. adequacy... and at line levels, I suspect even a cable as long as 50ft. between the mixer & crossover will likely result in adequate sound quality for the application.
Maximum Length of a Balanced Signal? - Sound - Blue Room ...
https://www.blue-room.org.uk/topic/18825-maximum-length-of-a-balanced-signal/
There's not really a maximum distance for a balanced line level signal because the circuit (unlike digital) doesn't suddenly drop out after a certain distance. It's more a case that interference and EQ non-linearities start to creep in over distance. How far you can feed depends on how many of these problems you can accept.
Now you know Maximum Distance Unbalanced Audio
Now that you know Maximum Distance Unbalanced Audio, we suggest that you familiarize yourself with information on similar questions.
