M Audio Projectmix Phantom Power Problem

We have collected the most relevant information on M Audio Projectmix Phantom Power Problem. Open the URLs, which are collected below, and you will find all the info you are interested in.

M-Audio Projectmix Problem - Gearspace.com

https://gearspace.com/board/low-end-theory/195919-m-audio-projectmix-problem.html

Deleted 86c3d96. Guest. My Studio. I had the exact same problem which ended up sending down months of sheer hell with M-Audio support. You need to replace that power supply ASAP before it destroys the circuitry of you ProjectMix. If you can find a third party power supply with the same rating, you should be fine.

M-audio ProjectMix I/O Problem. - Page 2 - Avid Pro Audio ...

https://duc.avid.com/showthread.php?t=368845&page=2

Page 2- M-audio ProjectMix I/O Problem. Third Party Interfaces. Try resetting the PMIO: Setup Button (SETUP): Pressing the SETUP button will access additional internal parameters, such as LCD Contrast, jog wheel calibration and factory defaults.To reset the unit to factory defaults (this resets the base running mode to Cubase and resets any data that has …

M-audio ProjectMix I/O Problem. - Avid Pro Audio Community

https://duc.avid.com/showthread.php?t=368845

M-audio ProjectMix I/O Problem. Third Party Interfaces. I bought a Projectmix second hand and it didnt have a power supply. So I bought a replacement, and now its a whole different issue...

Mike's Audio Review: M-Audio Project Mix i/o

https://mikesaudioreview.blogspot.com/2009/08/m-audio-project-mix-io.html

The Projectmix i/o has Phantom power on all 8-XLR inputs and has 8- 1/4" line level inputs as well as ADAT in/out, SPDIF, and wordclock with 4-1/4" main outputs for monitoring. The Projectmix i/o features really shine when you are pointing and clicking all over in Pro Tools, because when it comes down to it, you have all of the necessary features to control right in …

M-Audio ProjectMix I/O Control | zZounds

https://www.zzounds.com/item--MDOPROJECTIO

Of course, phantom power is provided for up to eight condenser mics and input 1 even features a front-panel instrument input so you easily plug a guitar or bass right in. 8 x 8 ADAT Lightpipe I/O brings the simultaneous input total to 16 and allows you to expand your system with devices like M-Audio's award winning Octane preamp.

M-Audio ProjectMix I/O Control User Reviews | zZounds

https://www.zzounds.com/productreview--MDOPROJECTIO

M-Audio ProjectMix I/O Control Surface/Interface. ... the i/o came with ableton live lite,various power adapter cables(i guess to suite different international sockets etc.) ... I am using a beringe compressor/limiter with a Samsun CO1 Condensor 48V phantom powered mic connected to my daw Sonar 7 Producer edition and Pro-Tools M-Powered. It ...

M-Audio Projectmix I/O problem | Cakewalk Forums

http://forum.cakewalk.com/MAudio-Projectmix-IO-problem-m1185431.aspx

Status: offline. RE: M-Audio Projectmix I/O problem 2007/10/16 01:54:56 ( permalink ) I had a similar problem when I first installed my PMix. Try removing all the software using the Firewire Family uninstall from the start menu, and manually delete the drivers. Do a fresh install with the firewire cable disconnected.

M-Audio Project Mix I/O - Sound on Sound

https://www.soundonsound.com/reviews/m-audio-project-mix-io

M-Audio Project Mix I/O. M-Audio have packaged a fully featured control surface with motorised faders, an 18-input Firewire interface and eight mic preamps in one box — at a very competitive price. When the Project Mix I/O arrived at the SOS office, we all thought 'Blimey! It looks just like the Digi 002!'. Digidesign and M-Audio are now part ...

M-Audio Project Mix I/o | Long & McQuade

https://www.long-mcquade.com/5847/Pro_Audio_Recording/Audio_Interfaces/M-Audio/Project_Mix_i_o.htm

Now you know M Audio Projectmix Phantom Power Problem

Now that you know M Audio Projectmix Phantom Power Problem, we suggest that you familiarize yourself with information on similar questions.