We have collected the most relevant information on Lt700 Audio Transformer. Open the URLs, which are collected below, and you will find all the info you are interested in.


LT700 - Peter Vis

    https://www.petervis.com/electronics/lt700-transformer/lt700-transformer.html

    LT-700 - PYFN

      http://pyfn.com/datasheets/transformers/LT700%20Audio%20Transformer%20-%20Stortech.pdf
      EI-19 transformer 5 Pins (of 6), 3 Windings EI-19 3x3 Bobbin Z11A EI-19 Core Stortech Electronics Ltd. Harlow, Essex. Great Britain. Telephone 01279-451100 www.Stortech.co.uk Whilst every effort has been made to ensure the accuracy of the information provided, no liability can be undertaken for any errors or omissions.

    LT700 Miniature Audio Output Transformer 1000 ohms to 3.2 ...

      https://www.cricklewoodelectronics.com/LT700-Miniature-Audio-Output-Transformer-1000-ohms-to-3.2-ohms-3.2-ohms.html
      LT700 Miniature Audio Output Transformer 1000 ohms to 3.2 ohms + 3.2 ohms £3.75 ( inc VAT £4.50 ) LT44 Miniature Audio Driver Transformer 20K ohms to 2 x 1K ohms

    Audio transformer (LT700) behaviour [newb] | diyAudio

      https://www.diyaudio.com/community/threads/audio-transformer-lt700-behaviour-newb.252206/
      This is the first time I've used an audio transformer so I'm really not sure what I should be expecting to see and the data on the LT700 seems pretty thin. So the question stands - on the config in the OP, from a 1V PP input, I'm seeing approx. 15VPP (between approx. 1V and 16V) at the output of the collector and approx. 800mV at the 'positive ...

    Wiring the Speaker to the LT700 Transformer

      https://www.petervis.com/Radios/making-a-crystal-radio/wiring-the-speaker-to-the-lt700-transformer.html
      LT700 Transformer Mounting and Wiring. Mounting the LT700 transformer is very simple in this build. The one I got was from eBay, and it was a PCB mount type with short leads. However, I discovered that if you bend the leads by approximately 45-degree angle then it is more than enough to be used with the screw cup system.

    Re: Settings for simulating an LT700 audio transformer ...

      https://groups.io/g/LTspice/message/70468
      The transformer is the wrong way round. The winding with the highest inductance should be the primary. There is something wrong with the inductances OR with the ratio 8V to 3V indicates the inductance ratio should be about 6:1 (8/3^2) With 0.55H on one side and 2.25m on the other, I read a ratio of about15:1 You should upload your .asc file to the Temp directory, so the …

    Re: Settings for simulating an LT700 audio transformer ...

      https://groups.io/g/LTspice/message/70507
      Settings for simulating an LT700 audio transformer output in LT? ... To confirm - my priorities right now are to get the transformer wired up in the sim correctly with a 4R speaker/load on the outputs and to get the settings right for each of the inductors to be bale to reproduce what I'm seeing on the breadboard - approx. 8V PP at the ...

    LT700 AUDIO TRANSFORMER | eBay

      https://www.ebay.com/itm/263690340712

      LT700 Audio Output Transformer | Bowood Electronics

        https://www.bowood-electronics.co.uk/buy/lt700-audio-output-transformer/
        LT700 Miniature Audio Output Transformer Primary: 1.2K center tapped Secondary: 3.2 ohm £ 2.40

      Three Transistor Radio Circuit Diagram - Peter Vis

        https://www.petervis.com/Radios/three-transistor-radio/three-transistor-radio-circuit-diagram.html

        Now you know Lt700 Audio Transformer

        Now that you know Lt700 Audio Transformer, we suggest that you familiarize yourself with information on similar questions.