We have collected the most relevant information on Linear Vs Audio Taper Pots Guitar. Open the URLs, which are collected below, and you will find all the info you are interested in.
Potentiometers. . Audio vs. Linear Taper | The Gear Page
https://www.thegearpage.net/board/index.php?threads/potentiometers-audio-vs-linear-taper.1300970/#:~:text=Value%20has%20nothing%20to%20do%20with%20taper.%20You,on%20the%20turn.%200-5%20covers%20the%20other%2030%25.
Audio or linear taper pots? What’s the difference ...
https://www.hoaglandcustom.com/2017/05/15/hello-world/
We prefer linear taper pots in the tone position for the control that they give you. A slight bump in a linear taper pot will give you a slight signal increase. That same slight bump with an audio taper pot might give you a BIG …
Audio or Linear Pots? - Six String Supplies
https://sixstringsupplies.co.uk/pages/audio-or-linear-pots
Linear pots will give a uniform decrease in volume/tone (you will notice more of an effect on each control knob setting) whilst audio will give a more instant (quicker) increase or decrease in volume or tone. If you gig a lot, audio may be better for a quicker boost while on stage.
linear taper v. audio taper pots? | Telecaster Guitar Forum
https://www.tdpri.com/threads/linear-taper-v-audio-taper-pots.309826/
If we use a linear taper potentiometer in a standard volume control circuit, we will hear “10” as only twice as loud as “1.” If we use an audio taper pot, “10” will sound ten times as loud as “1,” which is what we expect. Since 10=10 no matter what, an audio taper pot will have a much lower level “1” than a linear taper pot."
Linear vs Audio taper pots | Gretsch-Talk Forum
https://www.gretsch-talk.com/threads/linear-vs-audio-taper-pots.212479/
With linear taper 1/2 rotation is 1/2 the resistance, with audio taper 1/2 turn is somewhere around 1/4 or 3/4 the total resistance (depending on which contacts you check). The reason why all this is so inconsistent is because we are dealing with voltage divider circuits and the ratio of the pot resistance to the resistance of the pickup windings.
Linear vs audio taper for volume pot? | The Gear Page
https://www.thegearpage.net/board/index.php?threads/linear-vs-audio-taper-for-volume-pot.2270640/
Our ears' perception of volume is not linear therefore audio taper (log) pots adjust volume in a fashion that makes the sound appear to be linear throughout the range. Linear pots adjust gain in a linear fashion, irrespective of how volume is perceived, which has the effect on the ear of a steep curve where anything less than 7 is essentially off.
pots: audio taper vs. linear | Telecaster Guitar Forum
https://www.tdpri.com/threads/pots-audio-taper-vs-linear.466336/
In my experience, CTS audio pots stretch out the quiet end of the taper between 0 and 7. They get quiet too fast from 10. Linear pots stretch out the loud end of the taper between 3 and 10. They get loud too fast from 0. I don't mind that at all so I like linear. Neither offers a smooth steady change from 0 to 10.
Audio Taper vs Linear Pots | Fender Stratocaster Guitar …
https://www.strat-talk.com/threads/audio-taper-vs-linear-pots.80077/
for volume you want linear. it is much more user friendly. for volume swells it is the best. audio taper is just too slow to turn up. 30-35% voltage at 50% travel would be ideal, but haven't found that yet. so i'd rather go with 50% voltage at 50% travel vs 10% voltage (that is audio taper) at 50% travel. linear also gives a better dialing in of volume when rolling back.
Audio Taper vs. Linear Taper (whats what) and Cap ...
https://forum.seymourduncan.com/forum/the-guitar-shop/168189-audio-taper-vs-linear-taper-whats-what-and-cap-questions
Probably, but not necessarily. If you want to know if a new pot is audio or linear taper (before it's installed in a circuit), set the shaft at the halfway point and measure the resistance from the middle tab to each of the outside tabs on the pot. If the values are close to equal, it's linear.
Pedal builders... linear or audio taper, for pots ...
https://www.harmonycentral.com/forums/topic/1583744-pedal-builders-linear-or-audio-taper-for-pots/
Linear is linear, Audio is Logarithmic. Basically, let's say for a volume knob you use a Linear taper pot, you'll get a huge range of volume for the first tiny bit of the turn and as you go up the knob the increase you get plateaus off, so the last half of a turn hardly does anything. If you use a Log pot it's more natural of a sweep for volume.
Pots, audio vs linear taper | Fender Stratocaster Guitar …
https://www.strat-talk.com/threads/pots-audio-vs-linear-taper.302516/
Linear pots seem to have most of the tone change from about 0 to 2 then not much from 2 to 10. Volume pots are more moot, log is usually preferred but many LPs have linear. Linear is good if you want to make a small volume change from max. Linear pots are 50% at mid turn, so left or right wiring of them is all the same.
Now you know Linear Vs Audio Taper Pots Guitar
Now that you know Linear Vs Audio Taper Pots Guitar, we suggest that you familiarize yourself with information on similar questions.
