We have collected the most relevant information on Linear Taper Audio Taper Pots. Open the URLs, which are collected below, and you will find all the info you are interested in.


Audio or linear taper pots? What’s the difference ...

    https://www.hoaglandcustom.com/2017/05/15/hello-world/
    A LINEAR taper pot increases the signal in a linear fashion. (“1” on your control is equal to 10%, “4” is equal to 40% and so forth) This works very different from an audio taper volume pot. For those looking for a smooth, …

linear taper v. audio taper pots? - Telecaster Guitar Forum

    https://www.tdpri.com/threads/linear-taper-v-audio-taper-pots.309826/
    With linear taper pots, the volume (or tone) diminishes very fast in the first 1/4 turn of the pot, then very little happens with the next 3/4 of the rotation. Unless you have a very specific reason to use a linear taper pot in a guitar, don't. There's a …

Potentiometers: Audio vs. Linear Tapers - Jameco …

    https://www.jameco.com/Jameco/workshop/circuitnotes/Potentiometers-audio-taper-vs-linear.html
    Potentiometer taper is the relationship between the position and resistance of the pot. In a linear taper the relative position is equal to the resistance ratio. For example, rotating the potentiometer to 50% will cause the pot to function at 50% of the maximum resistance. Linear tapers can be good for adjusting lighting through light dimmers or for motion control. Non-linear tapers are …

Linear vs Audio taper pots | Gretsch-Talk Forum

    https://www.gretsch-talk.com/threads/linear-vs-audio-taper-pots.212479/
    With linear taper 1/2 rotation is 1/2 the resistance, with audio taper 1/2 turn is somewhere around 1/4 or 3/4 the total resistance (depending on which contacts you check). The reason why all this is so inconsistent is because we are dealing with voltage divider circuits and the ratio of the pot resistance to the resistance of the pickup windings.

Tone Pots: Audio or Linear taper? - The Tone Rooms

    https://www.thetonerooms.com/threads/tone-pots-audio-or-linear-taper.5703/
    Originally, the pots are a 500k audio taper Volume pot and a 250k audio taper Tone pot feeding a P90. I'm trying a 500k linear pot for the tone, and I'm not digging it any more than the 250k audio pot that was in there originally. Should I expect a 500k audio taper be significantly different from a 500k linear?

Now you know Linear Taper Audio Taper Pots

Now that you know Linear Taper Audio Taper Pots, we suggest that you familiarize yourself with information on similar questions.