We have collected the most relevant information on Linear Or Audio Volume Pot. Open the URLs, which are collected below, and you will find all the info you are interested in.


Do you use audio or linear pots for tone? - Gelvin Guitars

    https://rocksolidpickups.com/2021/11/26/do-you-use-audio-or-linear-pots-for-tone/#:~:text=Volume%20pots%20should%20be%20linear%20and%20tone%20should,where%20an%20audio%20taper%20would%20come%20into%20play.
    none

Audio or linear taper pots? What’s the difference ...

    https://www.hoaglandcustom.com/2017/05/15/hello-world/
    A LINEAR taper pot increases the signal in a linear fashion. (“1” on your control is equal to 10%, “4” is equal to 40% and so forth) This works very different from an audio taper volume pot. For those looking for a smooth, …

Do you use audio or linear pots for tone? - Gelvin Guitars

    https://rocksolidpickups.com/2021/11/26/do-you-use-audio-or-linear-pots-for-tone/
    Volume pots should be linear and tone should be audio taper. Most people suggest the opposite because they are confusing an amplified circuit with an RC circuit. The tone of your guitar is not an amplifier circuit where an audio taper would come into play. It is a capacitor resistor circuit. The two are different and should be treated as such.

Potentiometers: Audio vs. Linear Tapers

    https://www.jameco.com/Jameco/workshop/circuitnotes/Potentiometers-audio-taper-vs-linear.html
    Potentiometer taper is the relationship between the position and resistance of the pot. In a linear taper the relative position is equal to the resistance ratio. For example, rotating the potentiometer to 50% will cause the pot to function at 50% of the maximum resistance. Linear tapers can be good for adjusting lighting through light dimmers or for motion control. Non-linear tapers are …

Linear vs audio taper for volume pot? | The Gear Page

    https://www.thegearpage.net/board/index.php?threads/linear-vs-audio-taper-for-volume-pot.2270640/
    Our ears' perception of volume is not linear therefore audio taper (log) pots adjust volume in a fashion that makes the sound appear to be linear throughout the range. Linear pots adjust gain in a linear fashion, irrespective of how volume is perceived, which has the effect on the ear of a steep curve where anything less than 7 is essentially off.

Audio or Linear Pots? — Six String Supplies

    https://sixstringsupplies.co.uk/pages/audio-or-linear-pots
    Linear pots will give a uniform decrease in volume/tone (you will notice more of an effect on each control knob setting) whilst audio will give a more instant (quicker) increase or decrease in volume or tone. If you gig a lot, audio may be better for a quicker boost while on stage. There are also pots that fall between the two - our very own SSS Premium® CTS pots fall somewhere …

Volume Pots & Tone Pots: How Do They Work? | Fralin …

    https://www.fralinpickups.com/2017/03/03/volume-tone-pots-101/
    LINEAR VS. AUDIO TAPER? We get asked about Linear and Audio Taper pots a lot. Despite choosing which resistance of Pot to go with, there are two types of Pot “Tapers.” Taper refers to how the sweep acts and sounds. Is it smooth and gradual? Or, quick and abrupt? LINEAR POTS: Linear pots are, well, linear.

Why you should try a linear taper volume pot | Telecaster ...

    https://www.tdpri.com/threads/why-you-should-try-a-linear-taper-volume-pot.344430/
    Gibson have used linear for volume but (nearly) always log/audio for tone. On CTS and Alpha pots, A is for Audio/log and B is for linear, but other makes use A for linear and B for log. So some folks get confused as to what's fitted.

Tone Pots: Linear or Audio? Why? - Music Electronics Forum

    https://music-electronics-forum.com/forum/instrumentation/guitar-tech/1146-tone-pots-linear-or-audio-why
    The general rule of thumb is that audio taper is used for volume and anything approximating the volume-like function, where linear is used whenever knowing the "middle" of something is important. As you might expect, linear pots are used for things like blend/mix/balance controls, as well as for EQ controls where identifying exactly where you are …

Audio VS. Linear | My Les Paul Forum

    https://www.mylespaul.com/threads/audio-vs-linear.51147/
    Our ear is not linear. The measure for "how strong the sound is" is dB, which is logaritmic measure. That's why volume pots are not linear. On the other hand, tone pots do the same as volume pots, but just with a band of freq, so I suppose "audio pot" = "logaritmic pot".

Tone Pots: Audio or Linear taper? | The Tone Rooms

    https://www.thetonerooms.com/threads/tone-pots-audio-or-linear-taper.5703/
    That water heater sounds like a mission Chilli, take care not to catch chill. You'll notice quite a difference with Linear volume pots. Say, like to get the same effect as turning down to 7 with an audio taper pot you need to go down around 3 with a linear. I …

Now you know Linear Or Audio Volume Pot

Now that you know Linear Or Audio Volume Pot, we suggest that you familiarize yourself with information on similar questions.