We have collected the most relevant information on Kenwood Ts940 No Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.


Kenwood TS-940S no transmit or receive | QRZ Forums

    https://forums.qrz.com/index.php?threads/kenwood-ts-940s-no-transmit-or-receive.654082/#:~:text=If%20still%20no%20sounds%2C%20it%20could%20just%20be,27%2C%202019%20%233%20PA1NHZ%20Premium%20Subscriber%20QRZ%20Page
    none

Kenwood TS-940S no transmit or receive | QRZ Forums

    https://forums.qrz.com/index.php?threads/kenwood-ts-940s-no-transmit-or-receive.654082/
    After one year I turned on mine Kenood TS 940S. The transceiver is completely dead. No sound from the speaker. The main and sub display are working, mode and band switches are working. No readout on the meter at any setting. I have the Piexx cumputer interface board installed and it still controlled the radio. I did check the AVR board.

[email protected] | Kenwood TS-940SAT with Low Output on ...

    https://groups.io/g/kw-ts940s/topic/82520777
    The ALC alignment procedure in the Kenwood TS-940 Service Manual is seriously flawed. The procedure uses a fixed level of modulation input at the Mic connector, 1.5 kHz audio tone at 5mV. In Step 1, the procedure has you set the Mic Gain VR to MAX, but then instructs you to engage the SEND switch and adjust VR8 on the CONT unit to set the ALC ...

KENWOOD

    https://www.kenwood.com/usa/Support/pdf/TS-940.pdf
    — no da- mage or personal injury. CAUTION: Equipment damage may occur, but not per- sonal injury, FEATURES Circuit Configuration providing Receiver Performance of the Highest Quality. 1. Trio-Kenwood has succeeded in achieving the highest level dynamic range of 1 02 dB (with an IF bandwidth of 500 Hz.) 2.

KENWOOD TS-940 PAGE - Radioamatore.info

    https://www.radioamatore.info/attachments/508_Kenwood_TS-940S_Fixes_Reviews.pdf
    KENWOOD TS-940 PAGE Version 2: 4 April 2005, Version 3: 25 April 2005, Version 4: 27 May 2005, Version 5: 31May 2005, Version 6: 10 June 2005: Version 7: 16 June 2005: Version 8: 25 July 2005Version 9: 30 July 2005. Version 10: 4 August 2005, Version 11: 13 Sep 2005, Version 12: 18 October 2005, Version 13: 23 October 2005,

KENWOOD TS-940S MODS - N8RWS

    http://n8rws.com/RADIO1.htm
    The TS940 uses somewhat narrow 2.4 kHz filters and this was affecting my TX & RX audio response. The stock 930 filter set is a bit wider (2.7 or 3.0 as I understand it). The audio is applied to the 455 filter just after the balanced modulator. From the 455K filter the audio is …

Now you know Kenwood Ts940 No Audio

Now that you know Kenwood Ts940 No Audio, we suggest that you familiarize yourself with information on similar questions.