We have collected the most relevant information on Jl Audio 13w7 Vs 2 12w6. Open the URLs, which are collected below, and you will find all the info you are interested in.


2 jl w6 vs w7 and 12 vs 13

    https://www.the12volt.com/installbay/forum_posts.asp?tid=105617#:~:text=According%20to%20the%20JL%20site%20the%2013w6%20moves,an%20amp%20and%20only%20go%20with%20one%20sub.
    none

Jl 13w7 or 2 12w6...?? - ecoustics.com

    https://www.ecoustics.com/electronics/forum/car-audio/360445.html
    Jl 13w7 or 2 12w6...?? Tyler. New member. Username: Circa09skater. Post Number: 1. Registered: Jun-07. Posted on Monday, June 04, 2007 - 01:17 GMT. 1 1000/1 for w7 or 2 500/1 for w6's. both setups would cost about the same amount but which setup would give the better sq and which would give the better spl?

13w7 vs 2 12w6v3 | DiyMobileAudio.com Car Stereo Forum

    https://www.diymobileaudio.com/threads/13w7-vs-2-12w6v3.407665/
    Either the 2 12w6 or 1 13w7 would be placed in a ported box to JL's specs. For the time being will run the same amp (RF Punch 1000 - birthsheet 1484W rms@ 1 ohm). The W7 would have to be run at 0.75 ohms. Beyond the official specs on the amp but I've read that the RF amps do okay, and understand the risk.

1 13W7 Vs 2 12W6???? | Chevy Trailblazer SS Forum

    https://www.tbssowners.com/threads/1-13w7-vs-2-12w6.30271/
    Using linear displacements of the subs. (how much air they are capable of moving) after the math, the 2 W6’s have a result of 1.66L, where as the W7 has 2.20L all on its own. This is due to the excursion capabilities of the W7 as compared to the W6’s. however, the two 12s will have more surface area with the same amount of power, so im ...

2 jl w6 vs w7 and 12 vs 13

    https://www.the12volt.com/installbay/forum_posts.asp?tid=105617
    From what the jl site says 2 12w6 would need 2.5 cu ft. and a w7 will need 1.8 cu ft so that is fine. According to the JL site the 13w6 moves 69% more air than the 12w6 and the 13w7 moves 39% more air than the 12w7. Yes 69% is a …

Is Upgrading from JL Audio 13TW5v2 to 12W6v3 Worth It ...

    https://www.diymobileaudio.com/threads/is-upgrading-from-jl-audio-13tw5v2-to-12w6v3-worth-it.416037/
    To me there is a big difference on paper. The 13TW5 has slightly more cone area than the 12W6 but the 12W6 has 19mm of excursion vs 11mm and those are 1-way numbers. So you're looking at 38mm of movement capability vs 22mm. So if you can fit the 12W6, I think it will be a huge OUTPUT difference.

Any difference in Jl Audio 12w7 and 13w7 | Car Audio Forum ...

    https://www.caraudio.com/threads/any-difference-in-jl-audio-12w7-and-13w7.557099/
    Oct 19, 2013. Thread Starter Thread Starter. #13. with a 12, your getting 113.1 in^2 of cone area, a 13 nets you 132.7 in^2. You might lose some output if the trade was a for a 12 W7 since memphis motors are geared towards spl, but with a 13W7 has a bit more cone area to make up in output for it being an SQ based sub.

Now you know Jl Audio 13w7 Vs 2 12w6

Now that you know Jl Audio 13w7 Vs 2 12w6, we suggest that you familiarize yourself with information on similar questions.