We have collected the most relevant information on Jfet Audio Mixer. Open the URLs, which are collected below, and you will find all the info you are interested in.
Multi Channel Audio Mixer by 2N3819 JFET - EEWeb
https://www.eeweb.com/multi-channel-audio-mixer-by-2n3819-jfet/
2N3819 is an n-channel JFET especially manufactured for RF and mixer applications and provides very low noise, very low distortion and excellent high frequency gain. The power consumption is very low and you can power the audio mixer circuit by using a single 9V battery. You may need a shielded box to reduce hum and stop oscillations.
Mixers - JFET - InterFET
https://www.interfet.com/mixers/
BH1RBG RF Lab - Mixer: JFET active mixer
https://sites.google.com/site/linuxdigitallab/low-noise-crystal-experiment/mixer-j0-jfet-active-mixer
The single JFET mixer is simple but hard to control: 1) bias need carefully test per each JFET to bias the Source to half of Pinch Off voltage. 2) LO driver level is high, here use 2Vpp. MPF102's...
FET Audio Mixer - Electronics-Lab.com
https://www.electronics-lab.com/project/fet-audio-mixer-3/
This simple circuit mixes two or more channels into one channel (eg. stereo into mono). The circuit can mix as many or as few channels as you like and consumes very little power. The mixer is shown with two inputs, but you can add as many as you want by just duplicating the “sections” which are clearly visible on the schematic. Parts Notes
FET Audio Mixer - Aaron Cake
https://www.aaroncake.net/circuits/mixer1.asp
FET Audio Mixer This simple circuit mixes two or more channels into one channel (eg. stereo into mono). The circuit can mix as many or as few channels as you like and consumes very little power. The mixer is shown with two inputs, but you can add as many as you want by just duplicating the "sections" which are clearly visible on the schematic.
Now you know Jfet Audio Mixer
Now that you know Jfet Audio Mixer, we suggest that you familiarize yourself with information on similar questions.
