How To Make Cat5 Audio Interconnects

We have collected the most relevant information on How To Make Cat5 Audio Interconnects. Open the URLs, which are collected below, and you will find all the info you are interested in.

How to Make a Cat5e Patch Ethernet Cable - Warehouse Cables

https://www.warehousecables.com/how-to-make-a-cat5-patch-cable#:~:text=Bring%20all%20of%20the%20wires%20together%20as%20closely,a%20perfect%2090%20degree%20angle%20from%20the%20cable%2C

none

my DIY Cat5 audio interconnects | Headphone Reviews and ...

https://www.head-fi.org/threads/my-diy-cat5-audio-interconnects.82473/

I built two pairs of interconnects using CAT5 wires (2, not 4) and one pair using ratshack solid core 18AWG wire. The one with the 18 gage did not have detail. The CAT5s did not have bass. So I built one with 2 of CAT5 wires and 2 of 18AWG, 1ea for each connection. Now it rocks. I have detail, good treble and solid, clear bass. RECOMMENDED.

CAT 5 DIY Interconnects and Speaker Cable CookBook - TNT-Audio

https://www.tnt-audio.com/clinica/cat5questions_e.html

Along with our DIY speaker cables, many of our readers and egroup members have been building interconnects out of CAT 5 cable. I've built several sets of these myself and found their sound to be very good. Hopefully what is presented here will help to answer some of your questions. What follows is the questions and reply to one of our readers.

DIY Cat5 Speaker Cables - DIY Audio Cables, Landscape and ...

http://www.venhaus1.com/diycatfivecables.html

Cut 14 pieces of the Cat 5 to a length of 6 ft. (I needed about 5- 5 1/2 feet, and allowed for some "shrinkage" of length, due to braiding). Remove the blue PVC jacket (you may have to do it a foot at a time), and remove the twisted pairs.

TNT Shoestring DIY interconnects - [English] - TNT-Audio

https://www.tnt-audio.com/clinica/shoestrings_e.html

Thread a piece of the CAT5 through one of the V-shaped cuts, and into a channel. Carefully push it along the channel until it emerges at the end of the inner core. Leave about 25 mm protruding. Now do the same with the other piece of CAT5 in the cut on the opposite side of the inner core.

Now you know How To Make Cat5 Audio Interconnects