We have collected the most relevant information on Hdmi_Force_Edid_Audio=1 Openelec. Open the URLs, which are collected below, and you will find all the info you are interested in.
Audio Passthrough not working …
https://github.com/OpenELEC/OpenELEC.tv/issues/2966
My TV dont send correct edid signal. I have to use hdmi_force_edid_audio=1 in config.txt. With latest build for PI this is not working.
[solved] Help! No audio output from HDMI splitter | AVS Forum
https://www.avsforum.com/threads/solved-help-no-audio-output-from-hdmi-splitter.1486162/
hdmi_force_edid_audio=1 # HDMI Drive # Chooses between HDMI and DVI modes or forces a HDMI mode rather than DVI. # This can make audio work in DMT (computer monitor) modes. #hdmi_drive= 1 #Normal DVI mode (No sound) hdmi_drive= 2 #Normal HDMI mode (Sound will be sent if supported and enabled)
No sound over hdmi, connects as DVI - General Support ...
https://forum.libreelec.tv/thread/24945-no-sound-over-hdmi-connects-as-dvi/
If I add: Code. hdmi_group=1 hdmi_mode=16 hdmi_force_hotplug=1 hdmi_drive=2. to my config then my tv detects the rainbow square as "1080p hdmi" but then chages to "1080p dvi" for the libreelec splash. still no hdmi audio in the "audio output device" setting. I am using the HDMI closest to the USB C port. Dec 4th 2021.
RPiconfig - eLinux.org
https://elinux.org/RPiconfig
hdmi_ignore_edid=0xa5000080 hdmi_edid_file when set to 1, will read the edid data from the edid.dat file instead of from the monitor. hdmi_edid_file=1 hdmi_force_edid_audio Pretends all audio formats are supported by display, allowing passthrough of DTS/AC3 even when not reported as supported. hdmi_force_edid_audio=1
'config.txt' tag wiki - Raspberry Pi Stack Exchange
https://raspberrypi.stackexchange.com/tags/config.txt/info
hdmi_force_hotplug=1 config_hdmi_boost=4 hdmi_group=1 hdmi_mode=1 disable_overscan=0 hdmi_ignore_edid. Enables the ignoring of EDID/display data. hdmi_ignore_edid=0xa5000080 hdmi_force_edid_audio. Pretends all audio formats are supported by display, allowing passthrough of DTS/AC3 even when not reported as supported. hdmi_force_edid_audio=1 ...
Easily edit OpenELEC config with OpenELEC RPi Config …
https://www.smarthomebeginner.com/edit-openelec-config-txt-openelec-rpi-config-addon/
Overclocking Raspberry Pi on OpenELEC requires one to edit OpenELEC config files. Overclocking can bring, along with these Kodi performance improvement tips, can bring the best out of RaspberryPi.In fact, in my comparison, overclocked OpenELEC was better than Xbian or Raspbmc. It is one of the most common tweaks done to speed up RPi.
REALLY force Raspberry Pi to send audio via HDMI ...
https://raspberrypi.stackexchange.com/questions/13386/really-force-raspberry-pi-to-send-audio-via-hdmi
So I bought an HDMI-audio-extractor (Ligawo 6518725 HDMI Extractor), as the PWM analog audio output had poor quality. This set-up did not really work from the beginning, because there was no audio output. I was checking all the hdmi_drive=2, hdmi_force_hotplug=1, hdmi_ignore_edid, etc. options in /boot/config.txt.
No audio on HDMI from new Pi4b..... a common prob. it seems.
https://forum.kodi.tv/showthread.php?tid=348564
hdmi_drive=2 Ctrl+o to save and Ctrl+x to exit nano. Reboot and it should all work. You should also consider adding the line: hdmi_force_hotplug=1 Which will ensure HDMI is used even if unplugged or the TV is off when the libreelec box is turned on.
Now you know Hdmi_Force_Edid_Audio=1 Openelec
Now that you know Hdmi_Force_Edid_Audio=1 Openelec, we suggest that you familiarize yourself with information on similar questions.
