Graham Slee Audio Elevator Exp

Elevator EXP - MC Step-up Amplifier - Graham Slee

https://www.hifisystemcomponents.com/phono-preamps/elevator-exp-mc-step-up-amp.html

Graham Slee Elevator EXP Moving Coil Head Amplifier - LP GEAR

https://www.lpgear.com/product/GSPELEV.html

The Graham Slee Elevator EXP step-up moving coil MC head amplifier (active step-up device) is designed to express the full performance of low output MC phono cartridges of the highest caliber. The complete lack of flywheel effect or …

Graham Slee - Elevator EXP MC Step-up Pre-Preamp | Shop ...

https://www.musicdirect.com/preamp/graham-slee-elevator-exp-mc-step-up-pre-preamp

The Graham Slee Elevator 'steps-up' the output of Moving Coil (MC) cartridges and provides settings for loading and impedance to ensure optimal matching.Designed for MC cartridges with outputs at or below 1.0mV, the Elevator brings the output …

Elevator EXP - Graham Slee Audio Forum | HiFi System ...

https://www.hifisystemcomponents.com/forum/elevator-exp_topic5074.html

Graham Slee Reflex M, Graham Slee Elevator EXP, Speaker Triangle Esprit Antal EZ. Disconnect the turntable and set the Elevator EXP to 100 ohms load. If the buzz persists, please contact our service department (John C) by contact form, or on +44 1909 568739. If the buzz stops, is there a "turntable earth wire?"

Elevator EXP - Graham Slee Audio Forum | HiFi System ...

https://www.hifisystemcomponents.com/forum/elevator-exp_topic5070.html

Graham Slee Reflex M, Graham Slee Elevator EXP, Speaker Triangle. Since it was designed 18 years ago requirements might have changed. It had to span a range from 23 ohms to 47,000 ohms, in a period where some users wanted low impedances while others wanted high impedances. The low impedances are 23 - 100 ohms and the high impedances are 840 ...