We have collected the most relevant information on Geovision Audio Server Failed. Open the URLs, which are collected below, and you will find all the info you are interested in.
GeoVision Error: "Create direct sound failed"
https://www.worldeyecam.com/geovision-error-create-direct-sound-failed.html
GeoVision Error: "Create direct sound failed". GeoVision. Back to GeoVision Support | Support Home. Possible Causes. Missing or bad audio card. Solution. Update audio card driver. Replace audio card. Since no audio can be recorded without a proper audio card, this warning message cannot be disabled until the problem is resolved.
A List of Error Messages, Problems and ... - pd.geovision.tw
http://pd.geovision.tw/technotice/GV-System/Local-ErrorMessage.pdf
Direcdraw create Overlay failed! 1. For Windows Server 2003, the default Hardware Acceleration is "None". 2. The DirectX verison is not compatible. 1. Adjust the level of Hardware Acceleration to "Full". 2. Upgrade to DirectX 9.0c. Main System (GV250.exe ~ GV1480.exe) Initialize DirectSound Failed! The audio chip is not actiavated. 1.
Geovision ver 8 Webserver fail to start after reboot ...
https://www.cctvforum.com/topic/4630-geovision-ver-8-webserver-fail-to-start-after-reboot/
geo.exe file in 'Start -> Programs -> Startup' ? Geovision main system starts fine after a reboot. TCP server and recording starts auto, just as it should, but Webserver fails (or to be. more specific, does not start). Webserver runs fine if I start it manually, but it have to start auto if there is a powerfail.
Geovision Audio Surveillance Playback - CCTV Camera Pros
https://www.cctvcamerapros.com/Geovision-Audio-Playback-s/160.htm
Geovision Audio Surveillance Playback Audio surveillance can be played back and reviewed using your Geovision DVR if you have properly setup Geovision for audio recording.Audio playback is done using the same video log viewer that is used to …
Geovision WebCam Server Internet Setup - CCTV Camera …
https://www.cctvcamerapros.com/Geovision-WebCam-Server-Setup-s/124.htm
Then, Click OK. This ensures that the webcam server automatically restarts if Geovision restarts. You can leave the Server IP and Server Port fields set to their defaults. If you have more than one Geovision system on the same network, then you will want to adjust these values. Click on the Network button (6) noted above and select WebCam Server.
GeoVision : CCTV Solutions : GV-NVR Remote error …
https://www.slideshare.net/koonkai/remote-error-message
Webcam (Playback) Can't find audio data Audio files cannot be located for playback. Check if the DVR has audio files at that period of time. 2. Webcam (Server) Port 3550 used by TCP Server The port is in use by another server. Change to another port.
GeoVision Driver & Software Installation - Worldeyecam
https://www.worldeyecam.com/geovision-driver-amp-software-installation.html
GeoVision Driver & Software Installation. 1. Insert GeoVision Multicam Surveillance System DVD into the DVD-ROM, when the disk runs automatically, the following menu should pop up. 2. Select Install or Remove GeoVision GV-Series Driver. 3. Select Install or …
GeoVision Inc - Digital Video Surveillance System
http://www.geovisioncn.com/english/5_3_vs.htm
Inconsistency between audio and video occurred when GV-NVR was in connection; Issues of Wiegand function that failed to send cardholder data to Center V2 and VSM, and the video server was rebooted; Incorrect time stamp on the image after the Time Zone setting was changed; Failure to send an e-mail to multiple recipients
GeoVision Inc. GV-VS12 2ch H.264 Video Server
http://classic.geovision.com.tw/english/Prod_GVVS12.asp
GV-VS12 is a powerful H.264 Video Server with compact size and supports multiple applications. It supports PoE, and 2-channel full D1 real-time video and audio encoding, fully integrated with GV-NVR to form the most powerful IP surveillance solution. It also supports over 50 PTZ models to fulfill various project demands.
USAVision / GeoVision Support Forum • View topic - VMS14.1 ...
http://www.usavisionsys.com/forums/viewtopic.php?f=45&t=677
VMS14.1 Patch- "Port 80 in use". changing port wont work. Please apply the patch. 1. Extract the patch zip file and stop Webcam Server. 2. Copy and paste the DMWebCam.exe into in VMS folder (default path is C:\VMS) 3. Restart Webcam Server and the bug should be fixed.
Now you know Geovision Audio Server Failed
Now that you know Geovision Audio Server Failed, we suggest that you familiarize yourself with information on similar questions.
